Computer Graphics Video, Stereo & S/PDIF Audio & Data Over Twisted Pair Receiver
|
|
By: Kramer
Video & Computer Signal Processing Solutions
|
The TP-124 is a twisted pair receiver for computer graphics video, unbalanced stereo audio and RS-232 data signals. The TP-123 converts computer graphics, audio, and RS-232 inputs to a twisted pair signal, and the TP 124 converts the twisted pair signal back into computer graphics, audio and RS-232 data signals.
→ HDTV Compatible
→ Level (Gain) and EQ (Peaking) Controls
→ Input |
1 RJ-45 OUT connector |
→ Outputs |
Video: 1VGA/UXGA on a 15-pin HD connector; Audio: 1 audio S/PDIF RCA connector; 1 audio analog 3.5mm mini jack |
→ Max. Output Level |
Video: 1V; Audio: 2.5V |
→ Communication |
RS-232 on 2-pin terminal block; maximum bitrate 19200bps |
→ Controls |
Level: �-7.5dB to 4.4dB,EQ.: 0dB to 33dBu (130m) @50MHz |
→ Max. Resolution |
WXGA & 1080p |
→ S/N Ratio |
Video: 58dB unweighted, 68.3dB @5MHz weighted; Audio: < �-80dB |
→ Total Gain |
Audio: Analog/analog: 0dB; Analog/SPDIF: �-12dBFS |
→ Coupling |
AC |
→ THD N Audio |
<0.01% |
→ Power Source |
12V DC, 200mA. 550mA (TP-123/TP-124 pair when powered from TP-123 via Power Connect), 390mA (TP-123/TP-124 pair when powered from TP-124 via Power Connect) |
→ Dimensions |
12cm x 7.5cm x 2.5cm (4.7" x 2.95" x 0.98") W, D, H |
→ Weight |
0.3kg (0.67lbs) approx |
→ Accessories |
Power supply |
→ Options |
RK-3T 19" rack adapter |
→ Audio Outputs |
Unbalanced stereo and S/PDIF (24-bit 48kHz) simultaneously |
→ System Range |
Up to 100m (300ft). Greater distances possible depending on resolution and cable |
→ Cable |
UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5 |
→ Power Connect System |
Only one unit in a system, the transmitter or the receiver needs to be connected to a power source when the devices are within 50m (150ft) of each other |
→ Uni-Directional RS-232. |
Maximum bitrate 19200bps |
→ RS-232 Connect System |
The unit can send RS-232 commands on the twisted pair cable on top of the video signal. All the system units must have RS-232 Connect to use this feature |
→ Compact Kramer TOOLS |
3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.