Composite Video, S-Video & Stereo Audio Over Twisted Pair Receiver With IR Repeater
|
|
By: Kramer
Video & Computer Signal Processing Solutions
|
The TP10 is a twisted pair receiver for composite or s-Video (Y/C) signals and unbalanced analog stereo or S/PDIF digital audio signals. The TP-9 transmitter converts the video and audio to a twisted pair signal and the TP-10 converts the twisted pair signal back into video & audio signals.
→ Level (Gain) & EQ (Peaking) Controls
→ Input |
1 RJ-45 CAT 5 shielded connector (LINE IN) |
→ Output |
1 composite video 1Vpp/75Ω on a BNC connector; 1 s-Video 1Vpp/75Ω [Y], 0.3Vpp/75Ω [C] on a 4-pin connector; 1 S/PDIF (digital audio) on an RCA connector; 1 audio (analog audio) <8dBu on a 3.5mm mini connector |
→ Max. Output Level |
Video: 2.6V; Audio: 4.6Vpp |
→ Bandwidth |
Video: >70MHz/-3dB; Audio: 20Hz to 20kHz/0.1dB |
→ Non-Linearity |
<0.05% |
→ Diff. Gain |
<0.05% |
→ Diff. Phase |
0.09Deg |
→ S/N Ratio |
Video: >75dB/5MHz weighted; Audio: >73dB |
→ Audio Conversion Sample Rate |
48kHz |
→ Audio Conversion Resolution |
24-bits |
→ Power Source |
12V DC, 82mA |
→ Dimensions |
12cm x 6.95cm x 2.76cm (4.7" x 2.8" x 1.08") W, D, H |
→ Weight |
0.3kg (0.67lbs) approx |
→ Options |
RK-3T 19" rack adapter |
→ Audio |
S/PDIF or unbalanced analog |
→ IR Repeater |
1 IR sensor |
→ Twisted Pair Input/Outputs |
RJ-45 connector |
→ System Range |
up to 200m (650ft) |
→ Cable |
UTP (unshielded twisted pair) or STP (shielded twisted pair) such as CAT 5 |
→ Power Connect™ System |
Only one unit in a system, the transmitter or the receiver needs to be connected to a power source when the devices are within 50m (150ft) of each other |
→ Compact Kramer TOOLS™ |
3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.