16-Channel Powered VPD Combiner
|
|
By: Vigitron
Innovative Video Transmission Solutions
|
The Vigitron Video, Power and Data UTP Transmission
Vi 1416VPDD is an advanced device that combines video, PTZ data, and camera power over a single 4-pair UTP cable to simplify CCTV installations in a structured wiring environment. It supports up to 16 cameras and is designed to be placed at a location between the cameras and control room to extend the video up to 3,000 feet (915 m).
The Vi-1416VPDD has a 16 channel fully isolated class II built-in 28/24 VAC power supply. Each camera power output is equipped with a glass fuse for extra protection. All fuses are easily accessible from front. At the camera end the Vi1053VPD video balun/combiner provides video, power and data on separate outputs.
The Vi-1416-VPDD can be installed at the "head end" or “mid-span”. The video signals are connected through 4 RJ45 and Category-5 cables to passive or active UTP receivers at the control room. The data connections to the DVR are through 4-pair RJ-45 cables. There is a separate data connection for each camera. All equipment follows industry-standard EIA/TIA 568B pinouts. The Vi1416VPD is an ideal CCTV component for structured cabling environments.
Input Voltage | 110 VAC or 220 VAC, externally switch selectable |
Input Current | 4.8 Amps (110 VAC) / 2.4 Amps (220 VAC) |
Camera Power Voltage | Isolated class II, switch selectable 24 VAC, off or 28 VAC |
Current | 1 A maximum per camera, 12 A maximum aggregated |
Total power | 340 VA |
Fault Protection | 2 A glass fuse (front access) per camera |
Twisted Pair (UTP) | 100 Ohms /- 20%, 24 AWG minimum, Category 2-7 |
Diagnostics LEDs | No load or shut down: 16 red LEDs, one per channel |
Power present | 16 green LEDs, one per channel |
Connectors | Camera connection: RJ-45 connector |
Data | RJ-45 connector |
Control room video | RJ-45 connector |
Transient Immunity | per ANSI 587 C62.41 |
Humidity | 0 to 95%, non-condensing |
Temperature Operating | -20°C to 50°C |
Storage | -30°C to 70°C |
Minimum Airflow | 5 cft./min |
Heat | 1300 BTU/hour |
Dimensions | 1.75x17x12 in., 4.3x43x30.5 cm (HxWxL) |
Weight | 22 lb, 10 kg |
Material | Steel sheet metal |
Included Accessories | Mounting brackets for front, rear or wall installations; Rubber feet for desk applications; Moulded IEC 7-ft. (200 cm) power cord |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.