|
By: NVT
Video/Power transmission Solutions
|
Typically installed in the wiring closet or IDF room, the NVT Cable Integrator Hub NV-716J-PVD is a passive pass-through wiring device that efficiently consolidates camera power, video, and pan/tilt/zoom telemetry data onto a minimum of 4-pair RJ45 cables.
Power, video and data are converted at the camera using a PVD TM transceiver which utilizes a single 4-pair cable with RJ45 connectors to deliver each cameras signals to the NV-716J-PVD. Up to sixteen cameras are supported. The NV-716J-PVD receives low-voltage camera power from any third-party multi-output Class 2 power supply. Control Room connections are achieved with a single 4-pair RJ45 cable for each group of four cameras. P/T/Z telemetry data, if required, passes through another 4-pair RJ45 cable. Control Room connections may be made using any multi-channel NVT receiver or hub. All equipment employs industry-standard EIA/TIA 568B pinouts.
NV-716J-PVD features include:
→ Connectivity for up to sixteen cameras, each via a single RJ45 4-pair cable
→ Use with the NV-216A-PV or NV-218A-PVD transceivers or the NV-226J-PV transmitter at the camera
→ Uses any third-party power supply to power cameras via UTP over significant distances (see Power Distance Chart)
→ Cable-management solution from the camera to the Wiring Closet and on to the Control Room
→ 1U high; 1" deep; wall or rack-mountable
→ Limited lifetime warranty
Video UTP, RJ45 Connectors |
100 ohms |
Power |
16 to 24AWG (0,5mm to 1,3mm) |
Camera PVD connections |
Four front-panel RJ45 outputs support up to four fixed or P/T/Z telemetry cameras over 4-pair UTP |
Control Room VIdeo |
UTP video signals are passed through the unit and delivered to the control/MDF room via rear-panel RJ45 connectors. |
Control Room Data |
RS-422 or RS-485 type P/T/Z telemetry/ data signals are paralleled together in groups of four, and passed through the unit and delivered to the control room via a rear-panel RJ45 connector. |
Control UTP, RJ45 Connectors |
100 ohms |
Temperature |
-22 to 167 °F (-30 °C to 75 °C) |
Humidity (non-condensing) |
0 to 95% |
Dimensions, excluding brackets and connectors |
19in wide x 1.73in high x .8in deep(482mm wide x 44mm high x 21mm deep) |
Weight |
0.94lb (0.43kg) |
Mounting |
Rack mount |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.