1:10 Composite Video Distribution Amplifier
|
|
By: Kramer
Video & Computer Signal Processing Solutions
|
The VM1010 is a high-performance distribution amplifier for composite video. The VM 1010 can also be configured as a 1:5 distribution amplifier for s-Video (Y/C) signals and has controls to compensate for signal losses inherent in long cable runs.
→ Inputs | 2 Composite/Component Video, Looping, 1Vpp/75Ω on BNC Connectors With Termination Switch
|
→ Outputs | 2x5 Composite/Component Video, 1Vpp/75Ω on BNC Connectors
|
→ Max. Video Output | 1.8Vpp
|
→ Video Bandwidth (-3dB) | 235MHz
|
→ Diff. Gain | 0.2%
|
→ Diff. Phase | 0.04deg
|
→ K-Factor | <0.05%
|
→ Video S/N Ratio | 77dB
|
→ Non-Linearity | 0.2%
|
→ Control | Level: -1.4dB To 2.5dB, EQ.: 0 To 2.5dB @4.4MHz
|
→ Coupling | DC Or AC (User Selectable)
|
→ Power Source | 230v AC, 50/60hz (115v Usa), 10.3va
|
→ Dimensions | 19" X 7" X 1U W, D, H, Rack Mountable
|
→ Weight | 1.98kg (4.4lbs) Approx
|
→ Accessories | Power Cord
|
→ Dual-Mode | Configure As Either A 1:10 (Composite) Or A 1:5 (S-Video)DA
|
→ Gain | Grouped Level (Gain) And EQ (Peaking) Controls
|
→ Video AC/DC Coupling Selection | Yes
|
→ Looping Input | Yes
|
→ Termination | Selectable Input Signal Termination
|
→ Mount | Standard 19" Rack Mount Size - 1U |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.