590 W Per Channel Remote Control Amplifier
|
The Electro-Voice P-1200RT High-impedance output for 100/70V-lines with 2 x 590 watts. The dynamic limiter circuit includes the output transformer and limits THD to 1% maximum. The P 1200RT Loudspeaker outputs on barrier strip.
Built for the toughest tours and high-profile installations, Precision series remote control amplifiers deliver superb concert sound in a rugged package that stands up to the rigors of the road. High-power Class-AB designs drive your boxes as hard as you need to get full, clear coverage. Ultra-low distortion keeps your sound clean even at peak volumes with heavy loads. And road-ready design features—dual power supplies, multiple fans, and complete electronic protection circuitry—keep the show going while safeguarding both your investment and your reputation.
Long a staple of top touring companies, Precision series amplifiers are better than ever with the inclusion of the RCM-24 module, which brings P series amps under IRISNet control with state-of-the-art DSP technology. Offering system supervision, signal routing, advanced FIR-Drive loudspeaker optimization, IIR filters, level control, and dynamics, Precision series remote control amplifiers set the standard for professional concert sound.
→ Performance and control for fixed installation
→ 590 W per channel into 70/100 V line
→ Class-AB design
→ IRIS-Net enabled for remote control, monitoring, and DSP processing via included RCM-24 module
→ Eight recallable DSP/configuration presets
→ System check button for fast, complete test of all connected cables and loudspeaker components
→ Two GPI and two GPO ports
→ Parallel RJ-45 CAN bus connectors
→ Pilot tone detection for cable supervision
Connector Type | Barrier strip
|
Continuous Rated Power (1 kHz, THD 1%) 100v | 590 Watts
|
Continuous Rated Power (1 kHz, THD 1%) 70v | 580 Watts
|
Continuous Rated Power (20-20 kHz, THD<0,2%) 100v | 500 Watts
|
Continuous Rated Power (20-20 kHz, THD<0,2%) 70v | 500 Watts
|
Control Protocol | CAN-Bus
|
Controls | 2 x 0 V, 5V free configurable, Easy-Remote
|
Cooling | Front-to-rear, three 4-stage fans
|
DIM 30 | 0.2/0.3 % 100V/70V
|
FIR-Drive | No
|
Frequency Response | 45 - 20,000 Hz -1 dB
|
Input Impedance (Balanced) | 20 kΩ XLR Input
|
Input Sensitivity | 1.55 V ( 6dBu)
|
Intermodulation Distortion (SMPTE) | 0.1/0.3 % 100V/70V
|
Maximum Input Voltage | 8.7 V 21 dBu
|
Network Control (IRIS-Net) | Yes
|
Serial Interface | Network: CAN, 2 RJ45 (CAT-5 Cabling), RS-232 for media control systems
|
Signal-to-Noise Ratio (A-weighted) | 106 dB
|
Topology | Class-AB
|
Total Harmonic Distortion | 0.1/0.2 % 100V/70V
|
Height | 3RU 132.5 mm (5.22")
|
Width | 483 mm (19.02")
|
Depth | 390 mm (15.35")
|
Weight Net | 25 kg (55.12 lbs)
|
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.