Telecentric CORE optical bench, magnification 0.093x
|
Indicates the dimensions and shape of image, where "Ø =" stands for diameter and "x=" indicates the nominal image height and length (Tech Info for related drawing). Working distance: distance between the front end of the mechanics and the object. Set this distance within ±3% of the nominal value for maximum resolution and minimum distortion. Working f-number (wf/N): the real f-number of a lens in operating conditions. Maximum angle between chief rays and optical axis on the object side. Typical (average production) values and maximum (guaranteed) values are listed. Percent deviation of the real image compared to an ideal, undistorted image. Typical (average production) values and maximum (guaranteed) values are listed. At the borders of the field depth the image can be still used for measurement but, to get a very sharp image, only half of the nominal field depth should be considered. Pixel size used for calculation is 3.45 μm. Object side, calculated with the Rayleigh criterion with λ= 520 nm At max forward current. Tolerance is ± 0.06V on forward voltage measurements. Used in continuous (not pulsed) mode. At pulse width <= 10 ms, duty cycle <= 10% condition. Built-in electronics board must be bypassed (see tech info). Maximum width dimension considering illuminator/telecentric side and cable connector end
Main optical specifications |
Magnification | (x) | 0.093 |
Image shape dimension (1) | (Ø, x=mm) | Ø=11.4, x=9.4 |
Max sensor size | | 2/3″ |
Object field of view |
1/3” | (mm × mm) | 51.61 x 38.71 |
1/2.5” | (mm × mm) | 61.29 x 46.02 |
1/2” | (mm × mm) | 68.82 x 51.61 |
1/1.8” | (mm × mm) | 76.67 x 57.31 |
2/3” | (mm × mm) | 91.40 x 76.24 |
Advanced optical specifications |
Working distance (2) | (mm) | 278.6 |
Working ƒ/N (3) | | 8 |
Telecentricity typical (max) (4) | (deg) | < 0.06 (0.08) |
Distortion typical (max) (5) | (%) | < 0.04 (0.10) |
Depth of field (6) | (mm) | 47.90 |
Resolution (7) | (μm) | 55 |
Electrical specifications |
Light color, peak wavelength | | green, 520 nm |
Supply voltage | (V) | 12-24 |
Max power consumption | (W) | 2.5 |
LED voltage (8) | (V) | 3.3 (4.0) |
LED current (9) | (mA) | 350 |
Max pulse current (10) | (mA) | 2000 |
Mechanical specifications |
Mount | | C |
Phase adjustment | | Yes |
Length | (mm) | 696 |
Width (11) | (mm) | 218 |
Height | (mm) | 189 |
Mass | (g) | 15810 |
Environmental specifications |
Operating temperature | (°C) | 0-40 |
Storage temperature | (°C) | 0-50 |
Operating relative humidity | (%) | 20-85, non condensing |
Installation | | Indoor use only |
Eye safety |
Risk group according to CEI EN 62471:2010 | | Exempt |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.