Call Now: 1-800-284-2288 |
X Series Media Presentation Amplifier |
|
|
The Crestron AMP-X50MP is a low-cost audio amplifier solution that is suitable for a variety of applications. It features a compact, surface‑mountable design that installs virtually anywhere without requiring an equipment rack.
LoZ (4/8 Ω) and Hi-Z (70 V or 100 V) Output
High-efficiency Class D circuitry delivers 25 W per channel to drive one pair of 4 or 8 Ohm speakers, making it ideal to support stereo speakers at the front of a room or mono speakers in the ceiling. The amplifier can also be used with Hi-Z (70/100 V) speakers, delivering 50 W.
Convection Cooling
The efficient design provides cool running operation to ensure long term reliability. The AMP-X50MP is high-density stackable with other Crestron X Series and Modular Amplifiers, allowing multiple units to be installed vertically in an equipment rack without needing extra ventilation space.
Easy Installation
Installation and setup of the AMP-X50MP is simple. Detachable connectors facilitate the termination of wiring. Balanced and unbalanced inputs can connect directly to the line output of a video projector or display, audio processor, mixer, or AV switcher. Independent controls for volume, bass, and treble allow a custom sound in any location.
Fully Protected
The AMP-X50MP features protection against overheating, shorted or overloaded speaker lines, excessive input signals, and other faults. In the case of a shorted speaker line, both outputs mute automatically until the fault condition is resolved.
ENERGY STAR® Certified
An energy-efficient design enables the AMP-X50MP to meet demanding ENERGY STAR requirements. In addition to its high efficiency operation, the AMP-X50MP powers down automatically when no input signal is detected for more than 25 minutes, reducing overall power consumption and heat as part of an Energy Star® compliant system design. The amplifier quickly powers back on the instant an input signal is detected. A remote input can connect to a contact closure to place the amplifier in standby mode.
Audio¹ | ||||||||||||||||
Input Signal Types | Balanced or unbalanced analog line-level | |||||||||||||||
Output Power
|
||||||||||||||||
Frequency Response | LoZ (4-8 Ohms): 20 Hz to 20 kHz +/-0.5 dB at 1 W; Hi-Z (70 V/100 V): 90 Hz to 20 kHz +/-3 dB at 1 W; HPF @ 80 Hz (+/-10 Hz), -12 dB/Octave |
|||||||||||||||
THD+N | < 0.1 % at 1 kHz @ -3 dB full rated output power | |||||||||||||||
S/N Ratio | > 90 dBA, 20 Hz to 20 kHz, balanced, Hi-Z | |||||||||||||||
Crosstalk | -75 dB at 1 kHz | |||||||||||||||
Input Sensitivity | 1.23 Vrms, +4 dBu balanced; 0.316 Vrms, -10 dBV unbalanced; For 25 W @ 8 Ohms, 50 W @ 70 V/100 V |
|||||||||||||||
Gain | 21.5 dB @ 8 Ohms, Balanced | |||||||||||||||
Wake Signal Threshold | -57 dBu (1 mV) max | |||||||||||||||
Protection | Clip limiter, over current, under voltage, over temperature, DC offset, extreme high frequency | |||||||||||||||
Connectors | ||||||||||||||||
Speaker Output | (1) 6-pin, 5.08 mm pitch, 12 A plug with screw locking retainers; Power amplifier outputs; Wire Size: Terminals accept up to 12 AWG (3.31 mm²) |
|||||||||||||||
ALS OUT | (1) 3.5 mm connector, female; Unbalanced line level audio outputs; Maximum Output Level: 2.24 Vrms, +7 dBV (+9.2 dBu); Fixed audio output for assisted listening devices duplicates the summed audio input |
|||||||||||||||
AUDIO IN 1-2 (UNBALANCED) | (2) RCA connectors, female; Unbalanced line level audio inputs; Maximum Input Level: 2.24 Vrms, +7 dBV (+9.2 dBu) |
|||||||||||||||
AUDIO IN 1-2 (UNBALANCED) | (1) 3.5 mm connector, female; Unbalanced line level audio inputs; Maximum Input Level: 2.24 Vrms, +7 dBV (+9.2 dBu) |
|||||||||||||||
AUDIO IN 1-2 (BALANCED) | (1) 5 pin 3.5 mm detachable terminal block; Balanced line level audio inputs; Maximum Input Level: 7.75 Vrms, +20 dBu; Input Impedance: 20k Ohms |
|||||||||||||||
REMOTE | (1) 2 pin 3.5 mm detachable terminal block; Connect to contact closure to place amplifier in standby mode. |
|||||||||||||||
G | (1) M3 with captivated internal tooth lock washer screw; Chassis ground lug |
|||||||||||||||
24 V, 2.5 A | (1) External 60 W desktop power supply (24 VDC/2.5 A). Mates with locking barrel connector DC cord; Power supply included. |
|||||||||||||||
Controls & Indicators | ||||||||||||||||
PWR | (1) Bi-color white/red LED; White indicates operating power supplied; Red indicates standby mode. |
|||||||||||||||
FAULT | (1) Red LED; Indicates an over temperature or over current fault |
|||||||||||||||
SIGNAL | (1) Bi-color white/red LED; White indicates input signal presence; Red indicates input signal clipping/limiting |
|||||||||||||||
Hi-Z | (1) White LED; Indicates speaker output is in Hi-Z (70 V/100 V) mode |
|||||||||||||||
MONO/STEREO | (1) Slide switch to select STEREO, MONO; STEREO preserves channels; MONO creates a mono downmix of the input signals |
|||||||||||||||
HiZ/LoZ | (1) Slide switch to select LoZ (low impedance 4-8 ohms) or Hi-Z (high impedance 70 V/100 V) | |||||||||||||||
VOLUME, BASS, TREBLE | (3) Rotary knobs adjust volume, bass (+/- 6 dB), and treble (+/- 6 dB) levels | |||||||||||||||
Power | ||||||||||||||||
Main Power | 24 VDC, 2.5 A; 100-240V, 50/60Hz, 1.5A AC power supply included |
|||||||||||||||
Power Consumption | 14.6 W, 2 channels driven at 1/8th output power (4 ohms); 6 W, idle (Hi-Z mode) |
|||||||||||||||
Environmental | ||||||||||||||||
Temperature | 41 to 104° F (5° to 40° C) | |||||||||||||||
Humidity | 10% to 90% RH (non-condensing) | |||||||||||||||
Construction | ||||||||||||||||
Chassis | Metal, convection cooled (fanless) | |||||||||||||||
Front Panel | Metal, black finish with polycarbonate label overlay | |||||||||||||||
Mounting | Freestanding, surface mount, or 1/2 width 1 RU 19 in. rack mountable; Gangable with other Crestron modular and X series products (adhesive feet and surface mounting brackets included); Ganging kit and rack mounting kit optional |
|||||||||||||||
Dimensions | ||||||||||||||||
Height | 1.74 in. (44 mm) without feet; 1.85 in. (47 mm) with feet |
|||||||||||||||
Width | 4.33 in. (110 mm); 5.58 in. (142 mm) with surface kit; |
|||||||||||||||
Depth | 6.99 in. (178 mm) | |||||||||||||||
Weight | ||||||||||||||||
3.24 lb (1.5 kg) | ||||||||||||||||
Compliance | ||||||||||||||||
ENERGY STAR, ErP (1275/2008/EC), UL 62368, UL 2043, FCC Class B commercial and residential use |
NOTE: The amplifier is tested by an NRTL (Nationally Recognized Testing Laboratory) and complies to ANSI/UL2043 (Fire Test For Products Installed in Air-Handling Spaces). Full compliance requires plenum rated cables such as Crestron CBL-KAUDIO-RCAM2-L-P-50 audio cable, CBL-SPK-P-35 speaker cable, and CBL-PWR-EXT24V-P-6 DC power extension cable. Please note that the included power pack is not ANSI/UL2043 compliant, and thus cannot be installed in an air-handling space unless enclosed in a suitable plenum-rated enclosure. |
ss_amp-x50mp.pdf | datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|