Call Now: 1-800-284-2288 |
Dual USB3.0 Camera, CMOS, with Monochrome and Color Options, |
|
|
The Toshiba DDU1207M cameras have 2 channels of USB3.0 Interface for double the frame rate and bandwidth of the Toshiba DU1207M series cameras. The DDU1207M cameras use the Sony Pregius IMX253 sensor, a 12.3 megapixels, 1.1" type sensor that is available in with color and monochrome capabilities. The DDU1207M uses new IP TELI Core technology, providing high speed responses without a CPU.
Model | Chroma | Glass/Filter |
DDU1207MG | Monochrome | Dust Proof Glass |
DDU1207MCG | Color | IR Cut Filter Dust Proof Glass |
DDU1207MCF | Color | IR Cut Filter |
Dual USB Camera with 2 channels of USB3.0 Interface
Super high speed response with new IP Core "TELI Core Technology" (no CPU)
With Sony's ultra high image quality CMOS sensor
12.3MP (IMX253) 1.1 type: 60 frame per second, 4,096 (H) x 3,000(V) pixels
Global Shutter Type
Pixel size 3.45(H) x 3.45(U) μm
Correspond with TeliCamSDK
Model | DDU1207MG | DDU1207MCG | DDU1207MCF |
Imager | IMX253CMOS | ||
Pixel | 12.3MP, 4096 (H) x 3000(V) | ||
Scanning Area | 14.19mm x 10.34mm (1.1 type) | ||
Pixel Size | 3.45μm x 3.45μm | ||
Color Filter | MONOCHROME | RGB primary color mosaic-on-tip color filter | |
Glass/Filter | with dust-proof glass | with IR cut Filter, dust-proof glass | with IR cut filter |
Interface | USB3.0 (Only SuperSpeed is supported) | ||
Protocol | USB3 Vision | ||
Scan Method | Progressive | ||
Electronic Shutter Method | Global Shutter | ||
Image Output Format | Mono 12bit, Mono 10bit, Mono 8bit | Bayer 12bit, Bayer 10bit, Bayer 8bit | |
Frame Rate | 62fps (all pixel readout) | ||
Aspect Ratio | 4:3 | ||
Standard Sensitivity | 1600 lx F5.6, 1/62 s |
2300 lx F5.6, 1/62s |
2800 lx F5.6, 1/62s |
Minimum Sensitivity | F1.4, Gain +24dB, Video level 50% 3lx |
F1.4, Gain +24dB, Video level 50% 6lx |
|
Gain | MANUAL / AGC (0 to +24dB (factory setting: 0dB)) |
||
Gamma | γ=1.0 to 0.45 (factory setting γ=1.0) | ||
White Balance | N/A | Manual white-balance / One-push white-balance | |
Trigger Input Level | Low:0 to 0.5V, High:2.0 to 24.0V | ||
Power Supply | DC5V±5% (from USB connector) | ||
Power Consumption | 5.0W | ||
Lens Mount | C-Mount | ||
Optical Axis Accuracy | X=±25μm, Y=±25μm, θ=±0.07° | ||
External Dimensions | 40(W)mm x 40(H)mm x 35(D)mm (Not including protrusion) |
||
Mass | approx 90g | ||
Conformity | CE, FCC, RoHS, WEEE, GenICam, IIDC2 |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|