Call Now: 1-800-284-2288 |
FUMS-G Series Unmanaged Ethernet Switches 4- or 8-PORT, 10/100/1000 Mbps, requiring FSFP Module |
|
The Pelco FUMS-G Series Ethernet 4- and 8-port unmanaged switches are designed to transmit and receive 10/100/1000BASE-T(X) or 1000FX data through user-selectable small form-factor pluggable (FSFP) transceivers (ordered separately). The plug-and-play design of these FSFP modules ensures ease of installation requiring no electrical or optical adjustments.
Modular in design, the FUMS-G models may be either wall- or rack-mounted. LED indicators display operating status and critical operating parameters. These models are designed to operate in extreme environments. External power is required for the FUMS-G Series units. The units can be powered with the recommended FEXTPS fiber external power supply. The optical transmission of Ethernet-compatible IP camera surveillance video makes the FUMS-G Series ideal for transportation, airport, and college campus applications.
Available Configurations*
FUMS-GFX4 Ethernet unmanaged switch, requires FSFP modules† , 1000 Mbps, 4 data ports
FUMS-GFX8 Ethernet unmanaged switch, requires FSFP modules† , 1000 Mbps, 8 data ports
RECOMMENDED ACCESSORIES
EURACK Rack-mount chassis for up to 14 fiber optic modules, internal power supply, European power cord
USRACK Rack-mount chassis for up to 14 fiber optic modules, internal power supply, North American power cord
FEXTPS Fiber external power supply with multiple plug adaptors (North American, Australian, United Kingdom, and European); 100 to 240 VAC, 50 to 60 Hz input, 9 VDC output
*These switches do not support Internet Group Management Protocol (IGMP) and should not be used as a core switch.
† Requires selection of interchangeable FSFP modules (must be ordered separately) for specific fiber type, distance, and connector. Refer to FSFP Series Transceivers specification sheet for model number and description of FSFP modules. Multimode fiber must meet or exceed fiber standard ITU-T G.651. Single-mode fiber must meet or exceed fiber standard ITU-T G.652.
10/100/1000 Mbps Ethernet
Electrical Port Supports Autonegotiation for 10/100/1000 Mbps, Full-Duplex or Half-Duplex Data
Optical Port Supports 1000 Mbps Full-Duplex Data
Automatic Medium Dependent Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation
Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
Uses Interchangeable Small Form-Factor Pluggable (FSFP) Modules for Specific Fiber Type, Distance, and Connector (Must Be Ordered Separately)
Voltage Transient Protection on All Power and Signal Input/Output Lines Provides Protection from Power Surges and Other Voltage Transient Events
LED Status Indicators for Monitoring All Critical and Normal Operating Parameters
Hot-Swappable Rack Modules
Stand-Alone or Rack-Mountable Modular Design
Compliant with IEEE 802.3 Standards
ELECTRICAL
Power Input 9 to 24 VDC
Power Consumption
FUMS-GFX4 12 W
FUMS-GFX8 17 W
MTBF >100,000 hours
LED Indicators Optical link, data; Electrical link, data; Power
DATA
Data Interface Ethernet
Data Rate 10/100/1000 Mbps, IEEE 802.3 compliant Electrical port, full-duplex or half-duplex Optical port, full-duplex
Operating Mode FSFP dependent†
OPTICAL
Data Rate 1000 Mbps
Wavelength FSFP dependent†
Number of Fibers FSFP dependent†
MECHANICAL
Connectors
Optical FSFP dependent†
Power Terminal block
Data FSFP dependent†
Number of Rack Slots
FUMS-GFX4 1
FUMS-GFX8 2
GENERAL
Dimensions
FUMS-GFX4 15.5 × 13.5 × 2.8 cm (6.1" D × 5.3" W × 1.1" H)
FUMS-GFX8 15.5 × 13.5 × 5.6 cm (6.1" D × 5.3" W × 2.2" H)
Operating Temperature –40° to 75°C (–40° to 167°F)
Storage Temperature –40° to 85°C (–40° to 185°F)
Relative Humidity 0 to 95%, noncondensing
Weight Unit <0.45 kg (1.00 lb) Shipping 0.90 kg (2.00 lb)
CERTIFICATIONS/RATINGS
CE, Class E
FCC, Part 15
UL Listed
C-Tick
IEEE 802.3
Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control equipment environmental standards
† Requires selection of interchangeable FSFP modules (must be ordered separately) for specific fiber type, distance, and connector. Refer to FSFP Series Transceivers specification sheet for model number and description of FSFP modules. Multimode fiber must meet or exceed fiber standard ITU-T G.651. Single-mode fiber must meet or exceed fiber standard ITU-T G.652.
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|