Call Now: 1-800-284-2288 |
FUMS-F Series Unmanaged Ethernet Switches 4- or 8- port, 10/100 Mbps, with and without FSFP Modules |
|
The Pelco FUMS-F Series Ethernet 4- and 8-port unmanaged switches are designed to transmit and receive 10/100 Mbps data over optical fiber through user-selectable small form-factor pluggable (FSFP) options; or 10 Mbps or 100 Mbps data over Cat5e or Cat6 electrical cable. The electrical interface autonegotiates between 10 Mbps or 100 Mbps Ethernet rates without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate.
These units integrate four or eight independent 10/100 Mbps channels in a single package. The FUMS-FFX4TX4, FUMS-FFX2TX2, FUMS-FTX4, and FUMS-FFX8 require interchangeable FSFP modules (ordered separately) for specific fiber type, distance, and connectors.
Modular in design, the FUMS-F models may be either wall- or rack-mounted. LED indicators display operating status and critical operating parameters. These models are designed to operate in extreme environments. External power is required for the FUMS-F Series units. The units can be powered with the recommended FEXTPS fiber external power supply. The optical transmission of Ethernet-compatible IP camera surveillance video makes the FUMS -F Series ideal for transportation, airport, and college campus applications.
Available Configurations
FUMS-FFX8 Ethernet unmanaged switch, requires FSFP modules† , 100 Mbps, 8 FX optical ports
FUMS-FFX4TX4 Ethernet unmanaged switch, requires FSFP modules† , 10/100 Mbps, 4 TX electrical and 4 FX optical ports
FUMS-FTX8 Ethernet unmanaged switch, 10/100 Mbps, 8 TX electrical ports
FUMS-FFX4 Ethernet unmanaged switch, 100 Mbps, 4 FX optical ports
FUMS-FFX2TX2 Ethernet unmanaged switch, requires FSFP modules† , 10/100 Mbps, 2 TX electrical and 2 FX optical ports
FUMS-FTX4 Ethernet unmanaged switch, requires FSFP modules† , 10/100 Mbps, 4 TX electrical ports
RECOMMENDED ACCESSORIES
EURACK Rack-mount chassis for up to 14 fiber optic modules, internal power supply, European power cord
USRACK Rack-mount chassis for up to 14 fiber optic modules, internal power supply, North American power cord
FEXTPS Fiber external power supply with multiple plug adaptors (North American, Australian, United Kingdom, and European); 100 to 240 VAC, 50 to 60 Hz input, 9 VDC output
*These switches do not support Internet Group Management Protocol (IGMP) and should not be used as a core switch.
† Requires selection of interchangeable FSFP modules (must be ordered separately) for specific fiber type, distance, and connector. Refer to FSFP Series Transceivers specification sheet for model number and description of FSFP modules. Multimode fiber must meet or exceed fiber standard ITU-T G.651. Single-mode fiber must meet or exceed fiber standard ITU-T G.652.
10/100 Mbps Ethernet – 10Base-T/100Base-TX Electrical Port – 100Base-FX Optical Port
Electrical Port Supports Autonegotiation for 10 Mbps or 100 Mbps, Full-Duplex or Half-Duplex Data
Optical Port Supports 100 Mbps Full-Duplex Data
Automatic Medium Dependent Interface/Medium Dependent Interface Crossover (MDI/MDI-X) Operation
Designed to Meet NEMA TS 1/TS 2 and Caltrans Traffic Signal Control Equipment Environmental Standards
Uses Interchangeable Small Form-Factor Pluggable (FSFP) Modules for Specific Fiber Type, Distance, and Connector (Must Be Ordered Separately)
Voltage Transient Protection on All Power and Signal Input/Output Lines Provides Protection from Power Surges and Other Voltage Transient Events
LED Status Indicators for Monitoring All Critical and Normal Operating Parameters
Hot-Swappable Rack Modules
Stand-Alone or Rack-Mountable Modular Design
Compliant with IEEE 802.3 Standards
ELECTRICAL
Power Input 9 to 24 VDC
Power Consumption
FUMS-FFX4, FUMS-FFX2TX2, FUMS-FTX4 12 W
FUMS-FFX8, FUMS-FFX4TX4, FUMS-FTX8 17 W
Cable Cat5e or Cat6
MTBF >100,000 hours
LED Indicators Optical link, data; Electrical link, data; Power
DATA
Data Interface Ethernet
Data Rate 10/100 Mbps, IEEE 802.3 compliant
Operating Mode Electrical port, full-duplex or half-duplex Optical port, full-duplex
OPTICAL
Data Rate 100 Mbps
Wavelength FSFP dependent†
Number of Fibers FSFP dependent†
MECHANICAL
Connectors
Optical FSFP dependent†
Power Terminal block
Electrical RJ-45
Number of Rack Slots
FUMS-FFX4, FUMS-FFX2TX2, FUMS-FTX4 1
FUMS-FFX8, FUMS-FFX4TX4, FUMS-FTX8 2
GENERAL
Dimensions
FUMS-FFX4, FUMS-FFX2TX2, FUMS-FTX4 15.5 × 13.5 × 2.8 cm (6.1" D × 5.3" W × 1.1" H)
FUMS-FFX8, FUMS-FFX4TX4, FUMS-FTX8 15.5 × 13.5 × 5.6 cm (6.1" D × 5.3" W × 2.2" H)
Operating Temperature –40° to 75°C (–40° to 167°F)
Storage Temperature –40° to 85°C (–40° to 185°F)
Relative Humidity 0 to 95%, noncondensing
Weight Unit <0.45 kg (1.00 lb) Shipping 0.90 kg (2.00 lb)
CERTIFICATIONS/RATINGS
CE, Class E
FCC, Part 15
UL Listed
C-Tick
IEEE 802.3
Designed to meet NEMA TS 1/TS 2 and Caltrans traffic signal control equipment environmental standards
†Requires selection of interchangeable FSFP modules (must be ordered separately) for specific fiber type, distance, and connector. Refer to FSFP Series Transceivers specification sheet for model number and description of FSFP modules. Multimode fiber must meet or exceed fiber standard ITU-T G.651. Single-mode fiber must meet or exceed fiber standard ITU-T G.652.
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|