Call Now: 1-800-284-2288 |
EthernetConnect Extender with 1, 4, 8, or 16 ports, with Pass-Through PoE to 15 Watts, local or remote |
|
The EC-1500C Series is ideally suited for applications where the existing coaxial cable needs to be leveraged for transmission of IP signals. For UTP applications, the EC-1500U Series is an effective Cat5/Cat5e/Cat6 UTP extender device beyond the 100 m (328 ft) limit of traditional Ethernet. In addition, for system configurations that have a single cable connected to the camera, the EC-1500C/U Series can pass through PoE (up to 15 W) to the camera. Designed to be a cost-effective, general-use product, the EC-1500C/U Series provides maximum flexibility in these applications without any programming.
The EthernetConnect™ EC-1500C/U Series is used to extend Ethernet over copper (EoC). The EC-1500C Series extends up to 16 ports of 10/100 Mbps Ethernet with pass-through PoE over coaxial cable. The EC-1500U Series extends up to 16 ports of 10/100 Mbps Ethernet with pass-through PoE over twisted pair Cat5/Cat5e/Cat6 UTP cable. Single-channel units can be powered from a PoE source, allowing for an installed network where power is not readily available.
The EC-1500C/U Series units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for the user to select local or remote settings. All application configurations should be verified at the time of ordering to facilitate ease of installation.
Available Models
EC-1500C SERIES (COAXIAL CABLE)
Local or Remote
EC-1501C-M EthernetConnect local or remote single-port coaxial extender with pass-through PoE to 15 W, EoC using coaxial cable, mini case, 12 VDC/24 VAC
EC-1504C-W EthernetConnect local or remote 4-port coaxial extender with pass-through PoE to 15 W, EoC using coaxial cable, wall mount
Local
EC-1508CL-R EthernetConnect local 8-port coaxial extender with pass-through PoE to 15 W, EoC using coaxial cable, 1 RU rack mount
EC-1516CL-R EthernetConnect local 16-port coaxial extender with pass-through PoE to 15 W, EoC using coaxial cable, 1 RU rack mount
EC-1500U SERIES (UTP CABLE)
Local or Remote
EC-1501U-M EthernetConnect local or remote single-port UTP extender with pass-through PoE to 15 W, EoC using Cat5/Cat5e/Cat6 UTP, mini case, 12 VDC/24 VAC
EC-1504U-W EthernetConnect local or remote 4-port UTP extender with pass-through PoE to 15 W, EoC using Cat5/Cat5e/Cat6 UTP, wall mount
Local
EC-1508UL-R EthernetConnect local 8-port UTP extender with pass-through PoE to 15 W, EoC using Cat5/Cat5e/Cat6 UTP, 1 RU rack mount
EC-1516UL-R EthernetConnect local 16-port UTP extender with pass-through PoE to 15 W, EoC using Cat5/Cat5e/Cat6 UTP, 1 RU rack mount
ELECTRICAL
Operating Voltage
EC-1501C-M/1501U-M
PoE Voltage supplied by PoE
Non-PoE 12 to 32 VDC or 18 to 32 VAC, 1.5 W
EC-1504C-W/1504U-W 12 VDC, 5 W; 9 VDC† when in a USRACK or EURACK
EC-1508CL-R/1508UL-R 12 VDC, 10 W
EC-1516CL-R/1516UL-R 12 VDC, 20 W
Current Protection Automatic resettable solid-state current limiters
MTBF >100,000 hours
LED Indicators Operating power; Ethernet speed; Ethernet link and activity; extended link and activity
DATA
Data Interface 10/100Base-T Ethernet
Data Rate DIP switch selectable 10/100 Mbps; full data rate/full-duplex up to the maximum rated distance
RFC 2544 TCP/IP packet transmission
Standards PoE IEEE802.3af RFC 768 UDP, 2068 HTTP, 793 TCP, 791 IP, 1783 TFTP, 894 IP over Ethernet
Media | COAX-RG59/U | COAX-RG59/U | UTP, 4 Pair | UTP, 4 Pair |
---|---|---|---|---|
Camera Data Rate | 10 Mbps | 100 Mbps | 10 Mbps | 100 Mbps |
Non-PoE Camera* | 1,524 m (5,000 ft) | 549 m (1,800 ft) | 914 m (3,000 ft) | 610 m (2,000 ft) |
PoE CLASS2 Camera (6.5 W)* | 914 m (3,000 ft) | 549 m (1,800 ft) | 914 m (3,000 ft) | 610 m (2,000 ft) |
PoE CLASS3 Camera (13 W)* (10 W in pass-through mode) | 228 m (750 ft) | 228 m (750 ft) | 228 m (750 ft) | 228 m (750 ft) |
*Distance figures are based on a 50 V PSE PoE power source, and external power supplies for the extenders. Distance figures are obtained using in-house testing mirroring installations. Factors such as coaxial and copper cable quality, the number of connectors and splices in the cable run, the use of PoE, and environmental conditions encountered within the installation might affect the actual transmission distance and should be taken into consideration. Due to advanced negotiation signaling required in IEEE802.3at applications, pass-through applications are limited to IEEE802.3af PD devices only.
MECHANICAL
Connectors
Ethernet RJ-45
Extended Interface Coaxial Female BNC UTP RJ-45
Operating Power Powered by PoE or two-pin screw terminal
GENERAL
Dimensions
1 CH 8.4 x 6.4 x 2.8 cm (3.3" D x 2.5" W x 1.1" H)
4 CH 15.5 x 13.5 x 2.8 cm (6.1" D x 5.3" W x 1.1" H)
8 CH 15.5 x 48.26 x 4.45 cm (6.1" D x 19" W x 1.75" H)
16 CH 15.5 x 48.26 x 4.45 cm (6.1" D x 19" W x 1.75" H)
Operating Temperature –40° to 75°C (–40° to 167°F)
Storage Temperature –40° to 80°C (–40° to 176°F)
Relative Humidity 0% to 95%, noncondensing
Shipping Weight
1 CH <0.5 kg (1 lb)
4 CH <0.9 kg (2 lb)
8 CH <2.3 kg (5 lb)
16 CH <2.3 kg (5 lb)
CERTIFICATIONS/RATINGS
CE, Class A
FCC, Part 15, Class A
UL/cUL Listed
C-Tick
Designed to meet NEMA TS-1/TS-2 standards and the Caltrans for traffic signal control equipment environmental standards
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|