Call Now: 1-800-284-2288 |
Pan & Tilt Mobile Positioner Series; supports radar |
|
The Taurus-R supports radar or other payloads that can be independently positioned from the Pan & Tilt
The Moog Taurus-R Pan and Tilt was specifically designed to meet the most rugged ground vehicle mobile environments. The Taurus-R design uses the same design techniques of the QPT-90 drive train, electronics and protocol interfaces, allowing simple system integration. An internal tilt shaft eliminates the need for a tabletop. Balancing the load in tilt minimizes the torque required to move the payload in tilt resulting in greater payload capacity.
• RF Pass-thru turret
• Balanced payloads; up to 300 lbs static and 150 lbs mobile installations
• Fixed or Mobile Installations
• Mil-Spec Connectors
• Marine configuration that meets IP-67 standards
• Universal wiring for sensor integration
• Thermostatically controlled heaters
Sensor Integration
• Radar Antenna Systems
• Multi-Spectrum Cameras (Visible / IR)
• IR and Visible Illuminators
• Laser Range Finders
• Communication Antennas
• Acoustic Devices
Load Capacity: Static installation - up to 300 lbs (136 kg) balanced • Mobile installation - up to 150 lbs (68 kg) balanced
Operating Voltage Range: 24VDC (±4VDC)
Total Power: Pan & Tilt Axes: 2.6A pk, 2.0A continuous at 24VDC • Heater: 4.4A at 24VDC • Standby: 0.5A at 24VDC (no heater current)
Pan-Axis Range: 360° continuous rotation (slip ring)
Pan-Axis Speed: 0.005° - 30°/sec (dependent on payload)
Tilt-Axis Range: 180° (±90°)
Tilt-Axis Speed: 0.005° – up to 30°/sec on balanced payload
Internal Heater: Thermostatically controlled 0°C (32°F) ON • 1.7°C (35°F) OFF
Operating Temperature: -15°C to 55°C (5°F to 131°F) (without heater) • -30°C to 55°C (22°F to 131°F) (with heater)
Rotational Limits: Fixed tilt hard limit, adjustable soft limits on both axes
Feedback: Optical Encoders (0.01° readout)
Repeatability: 0.05°
Duty Cycle: Up to 90%
Motor Type / Drive: Stepper
Communication to Pan & Tilt: RS232 / 422 / 485, IP Ethernet: 10/100 Base-T
Communication to Sensors: RS232 / 422, Ethernet Pass-Through
Control Protocol: QuickSet or Pelco D
Connector Specifications: Mil-Spec grade used on all configurations
Load Connector Interfaces: 2 Mil-Spec connectors on each tilt axis platform
Materials: Housing 6061-T6 Aluminum, stainless steel hardware, permanently sealed radial ball bearings
Finish / Color: White powder coat paint over alodined chromate for corrosion resistance standard. Other colors and CARC available upon request
Weight: 94 lbs (43 kg)
Test Cable and Software: 6 ft test cable and software include
taurus-taurus-r-specs.pdf | datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|