Call Now: 1-800-284-2288 |
Quickset MPT-50 Pan and Tilt Positioner with Embedded Web server, payload of 75 lbs, and elevation torque of 50 lbs |
|
The MPT-50 (Moog Pan and Tilt) Positioner leverages the strength and reliability of Moog legacy products and is improved with an enhanced electronics package offering new advantages to mission critical applications.
MPT-50 Positioners are equipped with an integrated Health and Usage Monitoring System (HUMS). This provides intelligence to users regarding the condition of payloads, allowing for preventative maintenance to extend the life of critical equipment. An embedded web server enables easy discovery and control of all positioners and integrated components on a network thereby eliminating the need for 3rd party software. Expanded velocity control offers the MPT-50 finer resolution of speed and acceleration control, ultimately improving tracking and scaling applications. Users will enjoy the capacity of multiple configurable communication ports for convenient payload integration and communication.
Control and Configurability
• Embedded web server
• Serial or Serial over IP control
• Health and usage monitoring
• HD-SDI slip ring models available
• Continuous Rotation available
• Multiple payload communication ports: 4 configurable serial, 2 TTL and 1 IP port
• 10-bit linear response velocity control
• Standardized connectors
• GPS capability
Robust and reliable mechanical design
• Payload capacity up to 75 pounds
• Provides up to 50 foot pounds of elevation torque
• Versatile platform design for ease of customization
• Tabletop design accommodates a wide variety of payloads
Payload Rated Load Torque (Elevation): 50 lbf·ft (68 N·m)
Positioner Power Consumption
Max (simultaneous P&T move): 4.5 A peak, 3 A continuous
Standby (Idle, w/o heater): 650 mA.
Heater Power (switchable): 65W
Operating Voltage Range: 24VDC (+4/-0 VDC): 24 - 28 VDC Nominal, up to 70V capable
Azimuth - Pan
Range of Travel: Continuous, 435° models available
Speed: (@ rated load, nominal voltage) 0.005°/s to 50°/s
Elevation - Tilt
Range of Travel: 180° (± 90° from horizon)
Speed: (50 lb-ft load) 0.005°/s to 12°/s
Minimum Incremental Move (Az and/or El): 0.01°
Rotation Limits
Software Adjustable Limits: Individually adjustable azimuth and elevation (all models)
Mechanically Adjustable Switches: Individually adjustable azimuth & elevation (435° model), Adjustable elevation (continuous rotation models)
Position Feedback
9000 Line Encoder: Azimuth and Elevation
Resolution: 0.01°
Position Repeatability: 0.05°
Environmental: IP67
Operating Temperature
without heater: -15°C to 55°C
with internal heater: -30°C to 55°C
Construction: Cast Aluminum Housing, Stainless Steel Hardware
Drive System: 1.8° stepper motors, Hardened Steel Worm Drive Geartrain
Exterior Finish: Powder Coat White, special finishes available
Weight: HD-SDI model: 32 lb Standard model: 26.5 lb
Dimensions: HD-SDI model: 17.2"H (437 mm) x 13.96"W (355mm) x 8.25"D (210mm) Standard model: 14.02"H (356mm) x 13.96"W (355mm) x 8.25"D (210mm)
Command and Control: Integral Web Server
Protocol: Moog PTCR-1000*, Pelco-D
Resolution of velocity commands: 10-bit, linear response
Power outputs to payload
24 VDC - user on/off switchable: 5 Amp Max.**
12 VDC - user on/off switchable: 5 Amp Max.**
5 VDC - user on/off switchable: 4.8 Amp Max.**
3.3 VDC - constant power: 0.6 Amp Max.**
Health Monitoring w/Real Time Clock
Power On and Run Time monitoring: Included
Voltage monitoring: Input and User 24V, 12V & 5V Outputs
Current monitoring: User 24V, 12V & 5V Outputs
Communication interfaces to payload
Serial (RS232, RS422, RS485 configurable): 4
TTL: 2
IP: 1
Connector to Positioner: 53 conductor D38999
Connector to Payload: 53 conductor D38999 (x2)
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|