Call Now: 1-800-284-2288 |
USB over Twisted Pair Extender |
|
|
The Crestron® USB over Twisted Pair Extender (USB-EXT-2) delivers reliable USB signal extension for all types of USB 1.1 and 2.0 devices in a conference room, classroom, auditorium, command center, medical facility, public space, or residence. Without requiring any special configuration or drivers, the USB-EXT-2 enables wire runs up to 100 meters (330 feet) over a single CAT5e twisted-pair cable.
The USB-EXT-2 is compatible with USB 1.1 and High-Speed USB 2.0, supporting virtually any USB device type including keyboards and mice, whiteboards, game controllers, cameras, audio devices, mobile devices, printers, flash drives, hard drives, and hubs. It is plug-and-play compatible with computers running Windows®, macOS®, and Linux® operating systems without requiring any additional drivers to be installed.
The USB-EXT-2 is composed of two extender components. The “local” extender connects to your computer, conferencing system, media server, game console, or other USB host. The “remote” extender provides two USB ports for connecting USB devices (HID, cameras, microphones, mass storage, smartphones, etc.) at a remote location. Linking the two extender components requires just one run of CAT5e (or better) unshielded twisted-pair cable. Both extender components are powered by a single 100-240V AC power pack, which can be connected at either end wherever an AC power receptacle is available.
Note: The USB-EXT-2 is a simple point-to-point USB signal extender. It does not switch or route USB signals, and does not connect to a network. For KVM and other applications routing USB signals over an Ethernet network, please refer to the USB-EXT-DM-LOCAL and USB-EXT-DM-REMOTE.
Communications | ||
Link | USB extension up to 100 m (330 ft) over solid-core CAT5e (or better) unshielded twisted pair (UTP) cable | |
USB Device Support | USB 1.1 and 2.0 compatible including mass storage and isochronous devices | |
USB Hub Support | Any signal chain may include up to 4 USB hubs plus one USB-EXT-2 system | |
Maximum USB Devices | 30 USB devices, or 4 USB hubs with 26 USB devices | |
Host Computer OS Support | Windows, macOS, Linux | |
USB Throughput | USB 2.0 up to 480 Mbps; USB 1.1 up to 12 Mbps |
|
Connectors – Local Extender | ||
24V 1A | (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input (power pack included) |
|
Link | (1) 8-pin RJ45 connector, female; Connects to Link port on the Remote Extender |
|
USB | (1) USB Type B connector, female (USB B to A cable included); USB 2.0 device port for connection to the USB host computer, media server, game console, annotator, codec, etc. |
|
Config (front) | (For factory use only) | |
Connectors – Remote Extender | ||
24V 1A | (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input (power pack included) |
|
Link | (1) 8-pin RJ45 connector, female; Connects to Link port on the Local Extender |
|
Config (front) | (For factory use only) | |
USB (front) | (2) USB Type A connectors, female; USB 2.0 host ports for connection of USB mice, keyboards, whiteboards, game controllers, cameras, audio devices, mobile devices, printers, flash drives, hard drives, hubs, and other USB devices; Available USB Power: 1 Amp maximum per port, 1.5 Amps maximum total |
|
Indicators – Local Extender | ||
Mode | (1) Recessed pushbutton (for factory use only) | |
Power | (1) Blue LED, indicates operating power is supplied via the local power pack or via the Link connection | |
Link | (1) Green LED, indicates a valid Link connection to the Remote Extender | |
Host | (1) Green LED, indicates a valid connection to the USB host | |
Activity | (1) Amber LED, indicates data activity on the Link interface | |
Indicators – Remote Extender | ||
Power | (1) Blue LED, indicates operating power is supplied via the local power pack or via the Link connection | |
Link | (1) Green LED, indicates a valid Link connection to the Local Extender | |
Host | (1) Green LED, indicates a valid connection to the USB host at the Local Extender | |
Activity | (1) Amber LED, indicates data activity on the Link interface | |
Mode (rear) | (1) Recessed pushbutton (for factory use only) | |
Power | ||
Power Pack (included) [3] | Input: 100-240 Volts AC, 50/60 Hz; Output: 1 Amp @ 24 Volts DC |
|
Available USB Power | Supplies 1 Amp maximum per each of two USB Type A ports, 1.5 Amps maximum total | |
Environmental | ||
Temperature | 32° to 122° F (0° to 50° C) | |
Humidity | 20% to 80% RH (non-condensing) | |
Construction (Typical per Unit) | ||
Housing | Metal, black finish, adhesive rubber feet | |
Mounting | Includes four slots for wire ties or other third-party mounting hardware | |
Dimensions (Typical per Unit) | ||
Height | 1.03 in (26 mm) without feet | |
Width | 2.96 in (75 mm) | |
Depth | 3.43 in (87 mm) | |
Compliance | ||
CE, IC, FCC Part 15 Class B digital device |
usb-ext-2-specs.pdf | datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|