Call Now: 1-800-284-2288 |
Mini Camera Link 1CCD Black & White Camera |
|
|
The Hitachi KP-FM200WCL can be used for high-precision and high-speed image processing in many applications. The power supply through the camera link cable is possible from the PoCL frame grabber board. Because the power supply from the DCIN/SYNC connector is also possible, it is possible to make the camera work by using usual frame grabber board. The power supply from the DCIN/SYNC connector is given to priority when the power supply is supplied from both.
Imaging device | 2/3-inch global shutter CMOS (CMV2000) | |
---|---|---|
Effective pixels | 2048 (H) x 1088 (V) | |
Pixel size | 5.5 μm (H) x 5.5 μm (V) (square lattice) | |
Color filter | - | |
Sensing area | 11.264 mm (H) x 5.984 mm (V) | |
Scanning system | Progressive | |
Aspect ratio | ||
Frame rate | 280 frames per second (full pixel readout) | |
Pixel frequency | 40.0000 MHz | |
Horizontal scanning frequency | Full configuration: 310.078 kHz (80MHz) , 155.039 kHz (40MHz) Medium configuration : 155.039 kHz (80MHz), 77.519 kHz (40MHz) Base configuration: 77.519 kHz (80MHz), 38.759 kHz (40MHz) |
|
Vertical scanning frequency | Full configuration: 281.889 Hz (80MHz), 141.588 Hz (40MHz) Medium configuration: 141.588 Hz (80MHz), 70.956 Hz (40MHz) Base configuration: 70.956 Hz (80MHz), 35.519 Hz (40MHz) |
|
Sync system | Internal | |
Lens mount | C mount (Flange focal distance = 17.526 mm) | |
Video output | Digital output (Camera Link) Base configuration 2TAP (80MHz or 40MHz) Medium configuration 4TAP (80MHz or 40MHz) Full configuration 8TAP (80MHz or 40MHz) Output image size: 2048(H) x 1088(V) (full pixel readout) |
|
Resolution | Horizontal/Vertical: 1000TV lines | |
Sensitivity | 400 lx, F5.6, 3200 K | |
Signal noise to ratio | 48dB | |
Electric shutter | OFF, 1/71, 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/10000, 1/50000 second. OFF is normal exposure (frame rate) or changeable by variable shutter (16.125 μs to 211367 μs) |
|
Gamma | γ = 1 | |
Frame on demand | Mode | (A) Fixed shutter mode (8 steps or variable), (B) ONE trigger mode, (C) Burst trigger mode |
Trigger input | Camera Link (CC1) or DCIN/SYNC connector | |
Partial scan | Selectable start position and height of picture grabbing in 1H step. | |
Power supply voltage | 12 ± 1 VDC | |
Current consumption | Approx. 230 mA (Approx. 2.76 W) | |
Ambient temperature | Performance | 0 to +40 °C (+32 to +104 °F), less than 90 % RH |
Operation | 10 to +50 °C (+14 to 122 °F), less than 90 % RH | |
Storage | -20 to +60 °C (-4 to 140 °F), less than 70 % RH (without dew condensation) | |
Vibration endurance | 10 to 200 Hz 98 m/s2 | |
Shock endurance | 490 m/s2 | |
External dimensions | 44 (W) x 44 (H) x 41 (D) mm(Not including mount protrusions) | |
Mass | Approx. 130 g |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|