|
By: Sentech
Industrial, USB, & Medical Cameras
|
The Sentech STC-GEC133A is part of Sentech's Standard GigE camera line. It features a 1/3" color XGA sensor, 36fps and communication over a 6 pin Hirose or Ethernet connector.
The Sentech STCGEC133A boasts precision housing with accurate CCD alignment, a DC Auto Iris Lens Driver, a user-programmable Area of Interest (AOI) and a Gamma Table that can be imported. This camera meets all industry standards for GigE Vision� and GenICam�.
Resolution | SXGA (1.5 MegaPixel)
|
Image Sensor | 1/3" Interline CCD (ICX204AQ)
|
Signal Format | Progressive: Color
|
Frame Rate | 19 fps
|
Active Picture Element | 1024 (H) x 768 (V)
|
Cell Size (um) | 4.65 (H) x 4.65 (V) μm
|
Vertical Frequency | 36.42113 Hz at full resolution; 0.44238 to 147.16356 Hz adjustable via the communication
|
Horizontal Frequency | 28.9907 kHz
|
Pixel Frequency | 29.5 MHz
|
Sync System | Internal
|
Video Output | Digital 8, 10 or 12 bit Raw Data or RGB 8 bit
|
Interface | IEEE802.3 (1000BASE-T)
|
Protocol | GigE Vision® 1.2 and GenICam™ 2.0 compliant
|
ALC | Auto iris lens, electronic iris and AGC (ON/OFF)
|
Communication | UART Communication through Ethernet port
|
Trigger Mode | Edge Preset Trigger / Pulse Width Trigger (unlimited extended exposure)
|
Shutter Speed | Preset continuous mode: 10 usec to 16,777,216 usec; Preset trigger mode: 10 usec to 16,777,216 usec; Pulse |
Minimum Illumination | 24.70 Lux at F1.2, 36.42113 Hz
|
Gain | 0 to 20.4 dB
|
Noise Level | @ 8bit Output: ≤ 3 Digit (Gain 0dB), @ 10bit Output: ≤ 12 Digit (Gain 0dB), @ 12bit Output: ≤ 48 Digit (Gain 0dB) |
Gamma | 1.0 (Factory default) or uploadable gamma table
|
AOI Function | AOI setting adjustable via the communication
|
Smear Reduction | ON/OFF selectable via the communication
|
Color Interpolation | Available on RGB output
|
WhiteBalance | Auto, manual and push-to-set white balance is available on both Raw data output and RGB output
|
Auto Iris Lens Control | DC IRIS control input with video level target, peak/average and zone weight settings via the communication |
Lens Mount | C Mount
|
Connectors | RJ45 connector; Power/IO connector: HR10A-7R-6PB (Hirose) or equivalent; DC IRIS lens connector: M1951 (EMUDEN) or equivalent |
Optical Filter | IR Cut Filter on
|
Shock | 38G (3 directions, 3 times each)
|
Vibration | 10G (20 to 200Hz)
|
Power | Input Voltage: 10.8 to 26.4 Vdc, Consumption: < 5.0 W
|
Operating Temperature | -5°C ~ 35°C
|
Storage Temperature | -30°C ~ 65°C
|
Dimensions | 35 (W) x 35 (H) x 50.6 (D) mm excluding connectors
|
Weight | 120g
|
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.