Call Now: 1-800-284-2288 |
DIN Rail Motor Control, 2 feeds, 2 channels |
|
|
The DIN-2MC2 is a 2-channel motor control module designed to provide control of bidirectional motors for drapes, shades, projection screens, lifts, skylights, and gates. Each channel supports up/down or open/close control of a conventional three-wire bidirectional type motor up to 1/2 HP at voltages up to 240 Volts. Built-in timing and interlock logic make it easy to program the DIN-2MC2 for failsafe operation.
DIN-2MC2 features include:
Load Ratings | ||
Motor Control Channels | 2 | |
Per Channel | 0.5 HP @ 240 Volts AC, 50/60 Hz | |
Module Total | 1 HP @ 240 Volts AC, 50/60 Hz | |
Load Types | 3-Wire bidirectional motors | |
Connections | ||
1 – 2 | (2) sets of (3) captive screw terminals; 3-wire bidirectional motor control relays; Maximum Wire Size: 12 AWG (2.5 mm²) |
|
NET | (2) 4-pin 3.5mm detachable terminal blocks, paralleled; Cresnet slave port |
|
OVERRIDE | (2) 2-pin 3.5mm detachable terminal blocks, paralleled; Sensing input for external low-voltage contact closure; Activates override mode when a closure is present; Minimum Closure Rating: 10mA (per module) at 24 Volts |
|
Controls & Indicators | ||
OPEN & CLOSE 1 – 2 | (4) Red LEDs and (4) miniature pushbuttons for status indication and local control of each channel | |
NET ID | (2) 7-Segment green LED digits and (2) miniature pushbuttons for setting Cresnet ID | |
SETUP | (1) Red LED and (1) recessed miniature pushbutton for enabling setup mode and touch-settable ID | |
OVR | (1) Red LED and (1) miniature pushbutton for enabling override mode and saving override presets | |
PWR | (1) Green LED, illuminates when DC power is applied to the NET port | |
NET | (1) Yellow LED, indicates communication with the control processor | |
RESET | (1) Recessed miniature pushbutton, resets internal processor | |
Enclosure | ||
Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45mm front panel cutout, occupies 6 DIN module spaces (108mm) | ||
Power Requirements | ||
Cresnet Power Usage | 3 Watts (1.13 Amps @ 24 Volts DC) | |
Environmental | ||
Temperature | 32° to 104°F (0° to 40°C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Heat Dissipation | 10 BTU/hr | |
Dimensions | ||
Height | 3.71 in (94.2 mm) | |
Width | 4.18 in (106.0 mm) | |
Depth | 2.35 in (59.5 mm) | |
Weight | ||
7.4 oz (210 g) |
din-2mc2.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|