Call Now: 1-800-284-2288 |
USB over Ethernet Extender with Routing |
|
|
The Crestron® USB over Ethernet Extender (USB-EXT-DM) provides the ability to connect USB peripherals at multiple locations throughout a home, business, or educational facility and route them to one or more different computers (or other hosts) anywhere in the building. The USB signals are transported over the local Ethernet network and managed through a Crestron control system.
As part of a Crestron DigitalMedia™ system, the USB-EXT-DM provides seamless routing of all types of USB signals alongside video and audio. From any room with a video display, you can switch between several different computers, media servers, and game consoles anywhere in the building and control each one using your mouse and keyboard, game controller, or electronic whiteboard.
The USB-EXT-DM expands on DigitalMedia’s built-in USB HID routing abilities, adding enhanced USB connectivity to any DM® transmitter, receiver, or switcher without requiring any additional wiring. Installation is as simple as connecting a USB-EXT-DM module to the LAN port of a DM transmitter or receiver, or to a port on the local area network.
Available Configurations Include:
USB-EXT-DM-LOCAL |
USB over Ethernet Extender with Routing, Host Module |
|
|
|
USB-EXT-DM-REMOTE |
USB over Ethernet Extender with Routing, 4-Port Device Module |
USB-EXT-DM features include:
Communications | ||
Ethernet | 100Base-T or 1000Base-T, Layer 2 | |
Link Speed | Up to 480 Mbps, dependent upon network speed and quality | |
USB Device Support | USB 1.1 and 2.0 compatible including isochronous devices[2] | |
Connectors – USB-EXT-DM-LOCAL | ||
USB | (1) USB Type B female (cable included); USB 2.0 device port for connection to the USB host computer, media server, game console, annotator, codec, etc. |
|
Link | (1) 8-pin RJ45 female; Connects to an Ethernet network or directly to a USB-EXT-DM-REMOTE[3] |
|
Connectors – USB-EXT-DM-REMOTE | ||
USB | (4) USB Type A female; USB 2.0 host ports for connection of USB mice, keyboards, whiteboards, game controllers, cameras, mobile devices, printers, flash drives, hard drives, hubs, and other USB devices[2]; Available Power: 500 mA @ 5 Volts DC per port |
|
24V DC | (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input (power pack included) |
|
Link | (1) 8-pin RJ45 female; Connects to an Ethernet network or directly to a USB-EXT-DM-LOCAL[3] |
|
Controls & Indicators – USB-EXT-DM-LOCAL | ||
Power | (1) Blue LED, indicates operating power supplied via the USB host | |
Link | (1) Green LED, indicates a valid link connection to a USB-EXT-DM-REMOTE | |
Host | (1) Green LED, indicates a valid connection to the USB host | |
Activity | (1) Amber LED, indicates data activity over the link connection | |
Pair | (1) Pushbutton, used to establish a connection with a USB-EXT-DM-REMOTE | |
Controls & Indicators – USB-EXT-DM-REMOTE | ||
Power | (1) Blue LED, indicates operating power supplied via the power pack | |
Link | (1) Green LED, indicates a valid link connection to a USB-EXT-DM-LOCAL | |
Host | (1) Green LED, indicates a valid connection to the USB host at the USB-EXT-DM-LOCAL | |
Activity | (1) Amber LED, indicates data activity over the link connection | |
Pair | (1) Pushbutton, used to establish a connection with a USB-EXT-DM-LOCAL | |
Power Requirements | ||
USB-EXT-DM-LOCAL | USB powered via the USB host interface | |
USB-EXT-DM-REMOTE | 1 Amp @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack included |
|
Environmental | ||
Temperature | 32° to 122°F (0° to 50°C) | |
Humidity | 20% to 80% RH (non-condensing) | |
Enclosure (Typical per Unit) | ||
Construction | Black anodized aluminum | |
Mounting | Freestanding or surface mount (mounting bracket included) | |
Dimensions (Typical per Unit) | ||
Height | 1.02 in (26 mm) | |
Width | 3.94 in (100 mm) | |
Depth | 3.00 in (77 mm) |
usb-ext-dm.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|