Call Now: 1-800-284-2288 |
DigitalMedia 8G+ Transmitter 201 |
|
|
The DM-TX-201-C provides a simple interface for computers and high-definition AV sources as part of a complete Crestron® DigitalMedia™ system. Its low-profile, surface-mountable design makes it ideal for installation beneath a conference table, inside a lectern or equipment rack, or at virtually any other location in a boardroom, classroom, auditorium, or residence. It functions as a DM 8G+™ transmitter and switcher, providing HDMI®, VGA, and analog audio inputs along with Ethernet and USB HID ports for a total connectivity solution. In addition to DM 8G+, it is also compatible with HDBaseT®, allowing it to be connected directly to the input of an HDBaseT certified display device. It connects to the head end or display location using a single CAT type twisted pair cable.[1]
DM-TX-201-C features include:
Video | ||
Switcher | 2x1 combination digital/analog switch, Crestron QuickSwitch HD® | |
Input Signal Types | HDMI®, DVI[2], DisplayPort Multimode[2], RGB/VGA, component[3], S-Video[3], composite[3] | |
Output Signal Types | DM 8G+™ (DigitalMedia™ over one CAT type twisted pair copper wire)[1], HDBaseT®, HDMI, DVI[2] | |
Formats | DM 8G+, HDBaseT, HDMI, DVI, HDCP content protection support, RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, PAL | |
Input Resolutions, HDMI & DVI, Progressive | 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
Input Resolutions, HDMI & DVI, Interlaced | 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
Input Resolutions, RGB | 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz | |
Input Resolutions, Component[3] | 480i, 576i, 480p, 576p, 720p50, 720p60, 1080p24, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60 | |
Input Resolutions, Composite and S-Video[3] | 480i, 576i | |
Output Resolutions | Matched to inputs | |
Analog-To-Digital Conversion | 10-bit 165 MHz per each of 3 channels | |
Audio | ||
Switcher | 2x1 combination digital/analog switch | |
Input Signal Types | HDMI, DisplayPort Multimode[2], analog stereo | |
Output Signal Types | DM 8G+, HDBaseT, HDMI | |
Formats, HDMI | Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24, up to 8ch PCM | |
Formats, Analog | Stereo 2-channel | |
Analog-To-Digital Conversion | 24-bit 48 kHz | |
Performance (analog) | Frequency Response: 20Hz to 20kHz ±0.75dB; S/N Ratio: >90dB, 20Hz to 20kHz A-weighted; THD+N: <0.05% @ 1kHz; Stereo Separation: >90dB |
|
Communications | ||
Ethernet | 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP | |
USB | Supports signal extension of USB HID class devices, expandable to support virtually any USB 1.1 or 2.0 device using Crestron USB-EXT-DM USB over Ethernet Extenders[5] | |
DigitalMedia | DM 8G+, HDCP, EDID, CEC, PoDM, Ethernet | |
HDBaseT | HDCP, EDID, PoH, Ethernet | |
HDMI | HDCP, EDID, CEC | |
NOTE: Supports management of HDCP and EDID; supports pass-through and management of CEC between HDMI source and sink, or between HDMI source and a control system | ||
Connectors | ||
LAN | (1) 8-wire RJ45 female, shielded; 10Base-T/100Base-TX Ethernet port |
|
DM OUT | (1) 8-pin RJ45 female, shielded; DM 8G+ output, HDBaseT compliant; PoDM and PoH PD (Powered Device) port[4]; Connects to the DM 8G+ input of a DM switcher, receiver/room controller, or other DM device, or to a HDBaseT device, via CAT5e or Crestron DM-CBL-8G cable[1] |
|
HDMI OUT | (1) 19-pin Type A HDMI female; HDMI digital video/audio output; Also supports DVI[2] |
|
PWR 24VDC 0.75A | (1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input; PW-2407WU power pack included |
|
Ground | (1) 6-32 screw, chassis ground lug | |
USB HID | (1) USB Type B female; USB 2.0 device port for connection to the USB host interface of a computer or other USB HID-compliant host |
|
HDMI IN | (1) 19-pin Type A HDMI female; HDMI digital video/audio input; Also supports DVI and DisplayPort Multimode[2] |
|
RGB IN | (1) DB15HD female; RGB (VGA), component, S-Video, or composite video input[3]; Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, PAL; Input Levels: 0.5 to 1.5 Vp-p with built-in DC restoration; Input Impedance: 75 Ohms; Sync Input Type: Autodetect RGBHV, RGBS, RGsB, YPbPr; Sync Input Level: 3 to 5 Vp-p; Sync Input Impedance: 1k Ohms |
|
AUDIO IN | (1) 3.5mm TRS mini phone jack; Unbalanced stereo line-level audio input; Input Level: 2 Vrms maximum; Input Impedance: 10k Ohms |
|
Controls & Indicators | ||
LAN | (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity | |
DM OUT | (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence | |
PWR | (1) green LED, indicates operating power supplied via PoDM, PoH, or local power pack | |
HDMI IN | (1) green LED, indicates HDMI input is selected | |
RGB IN | (1) green LED, indicates RGB input is selected | |
SETUP | (1) red LED and (1) miniature recessed pushbutton for Ethernet setup | |
RESET | (1) miniature recessed pushbutton for hardware reset | |
Power Requirements | ||
Power Pack | 0.75 Amps @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack, model PW-2407WU included |
|
Power over DM (PoDM) | PoDM PD (Powered Device), capable of being powered by a PoDM PSE (Power Sourcing Equipment), conforms to IEEE 802.3af (802.3at Type 1) Class 3 (12.95W)[6] | |
Power over HDBaseT (PoH) | PoH PD (Powered Device), capable of being powered by a PoH PSE (Power Sourcing Equipment, conforms to IEEE 802.3af (802.3at Type 1) Class 3) (12.95W)[6] | |
Note: May be powered via power pack or PoDM/PoH, not both. | ||
Environmental | ||
Temperature | 32° to 104°F (0° to 40°C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Heat Dissipation | 30 BTU/Hr | |
Enclosure | ||
Chassis | Metal, black finish, with (2) integral mounting flanges, vented sides | |
Mounting | Freestanding, surface mount, or attach to a single rack rail | |
Dimensions | ||
Height | 6.47 in (165 mm) | |
Width | 7.36 in (187 mm) | |
Depth | 1.24 in (32 mm) | |
Weight | ||
25.4 oz (721 g) |
dm-tx-201-c.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|