Call Now: 1-800-284-2288 |
Wall Plate DigitalMedia 8G+ Transmitter 200 |
|
|
The DM-TX-200-C-2G installs in a double-gang electrical box to provide a convenient interface for computers and high-definition AV sources as part of a complete Crestron® DigitalMedia™ system. It is ideal for wall, lectern, and floor box applications in a boardroom, classroom, auditorium, or residence. It functions as a DM 8G+™ transmitter and switcher, providing HDMI®, VGA, and analog audio inputs along with a USB HID host port. In addition to DM 8G+, it is also compatible with HDBaseT®, allowing it to be connected directly to the input of an HDBaseT certified display device. It connects to the head end or display location using a single CAT type twisted pair cable.[1] Standard gang-box mounting allows for installation adjacent to an Ethernet jack (Crestron MP-WP183 or equivalent) for a total connectivity solution.[2]
Available Configurations Include:
DM-TX-200-C-2G-B-T |
Wall Plate DigitalMedia 8G+™ Transmitter 200, Black Textured |
|
|
|
DM-TX-200-C-2G-W-T |
Wall Plate DigitalMedia 8G+™ Transmitter 200, White Textured |
DM-TX-200-C-2G features include:
Video | ||
Switcher | 2x1 combination digital/analog switch, Crestron QuickSwitch HD® | |
Input Signal Types | HDMI®, DVI[3], DisplayPort Multimode[3], RGB/VGA, component[4], S-Video[4], composite[4] | |
Output Signal Types | DM 8G+™ (DigitalMedia™ over one CAT type twisted pair copper wire), HDBaseT® [1] | |
Formats | DM 8G+, HDBaseT, HDMI, DVI, HDCP content protection support, RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, PAL | |
Input Resolutions, HDMI & DVI, Progressive | 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
Input Resolutions, HDMI & DVI, Interlaced | 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
Input Resolutions, RGB | 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 1024x768@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1152@60Hz | |
Input Resolutions, Component[4] | 480i, 576i, 480p, 576p, 720p50, 720p60, 1080p24, 1080i25 (1125 lines), 1080i30, 1080p30, 1080p50 (1125 lines), 1080p60 | |
Input Resolutions, Composite and S-Video[4] | 480i, 576i | |
Output Resolutions | Matched to inputs | |
Analog-To-Digital Conversion | 10-bit 165 MHz per each of 3 channels | |
Audio | ||
Switcher | 2x1 combination digital/analog switch | |
Input Signal Types | HDMI, DisplayPort Multimode[3], analog stereo | |
Output Signal Types | DM 8G+, HDBaseT | |
Formats, HDMI | Dolby Digital®, Dolby Digital EX, DTS®, DTS-ES, DTS 96/24, up to 8ch PCM | |
Formats, Analog | Stereo 2-channel | |
Analog-To-Digital Conversion | 24-bit 48 kHz | |
Performance (analog) | Frequency Response: 20Hz to 20kHz ±0.75dB; S/N Ratio: >90dB, 20Hz to 20kHz A-weighted; THD+N: <0.05% @ 1kHz; Stereo Separation: >90dB |
|
Communications | ||
USB | Supports signal extension of USB HID class devices, expandable to support virtually any USB 1.1 or 2.0 device using Crestron USB-EXT-DM USB over Ethernet Extenders[6] | |
DigitalMedia | DM 8G+, HDCP, EDID, CEC, PoDM, Ethernet | |
HDBaseT | HDCP, EDID, PoH, Ethernet | |
HDMI | HDCP, EDID, CEC | |
NOTE: Supports management of HDCP and EDID; supports pass-through and management of CEC between HDMI source and sink, or between HDMI source and a control system | ||
Connectors – Front | ||
AUDIO IN | (1) 3.5mm TRS mini phone jack; Unbalanced stereo line-level audio input; Input Level: 2 Vrms maximum; Input Impedance: 10k Ohms |
|
USB HID | (1) USB Type A female; USB 2.0 host port for connection of a mouse/keyboard or other USB HID-compliant device |
|
HDMI IN | (1) 19-pin Type A HDMI female; HDMI digital video/audio input; Also supports DVI and DisplayPort Multimode[3] |
|
PC IN | (1) DB15HD female; RGB (VGA), component, S-Video, or composite video input[4]; Formats: RGBHV, RGBS, RGsB, YPbPr, Y/C, NTSC, PAL; Input Levels: 0.5 to 1.5 Vp-p with built-in DC restoration; Input Impedance: 75 Ohms; Sync Input Type: Autodetect RGBHV, RGBS, RGsB, YPbPr; Sync Input Level: 3 to 5 Vp-p; Sync Input Impedance: 1k Ohms |
|
Connectors – Rear | ||
DM OUT | (1) 8-pin RJ45 female, shielded; DM 8G+ output, HDBaseT compliant; PoDM and PoH PD (Powered Device) port[5]; Connects to the DM 8G+ input of a DM switcher, receiver/room controller, or other DM device, or to a HDBaseT device, via CAT5e or Crestron DM-CBL-8G cable[1]; Note: RJ45 jack is recessed to accommodate long male cable connectors |
|
24VDC 0.7A | (1) 2-pin captive screw terminal block; 24 Volt DC power input; PW-2407WUL power pack included |
|
G | (1) 6-32 screw, chassis ground lug | |
Controls & Indicators | ||
PWR | (1) green LED, indicates operating power supplied via PoDM, PoH, or power pack | |
RESET | (1) miniature recessed pushbutton for hardware reset | |
SETUP | (1) red LED and (1) miniature recessed pushbutton for Ethernet setup | |
8G LINK | (1) green LED, indicates DM link status | |
8G ACTV | (1) yellow LED, indicates video and HDCP signal presence | |
HDMI | (1) green LED, indicates HDMI input is selected | |
PC | (1) green LED, indicates PC input is selected | |
DM OUT (rear) | (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence | |
Power Requirements | ||
Power Pack | 0.75 Amps @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack, model PW-2407WUL included |
|
Power over DM (PoDM) | PoDM PD (Powered Device), capable of being powered by a PoDM PSE (Power Sourcing Equipment), conforms to IEEE 802.3af (802.3at Type 1) Class 3 (12.95W)[7] | |
Power over HDBaseT (PoH) | PoH PD (Powered Device), capable of being powered by a PoH PSE (Power Sourcing Equipment), conforms to IEEE 802.3af (802.3at Type 1) Class 3 (12.95W)[7] | |
Note: May be powered via power pack or PoDM/PoH, not both. | ||
Environmental | ||
Temperature | 32° to 95°F (0° to 35°C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Heat Dissipation | 36 BTU/hr | |
Enclosure | ||
Construction | Metal | |
Flush Mount | Mounts in a 2-gang electrical box or in a 2-gang opening in a typical 6 inch deep floor box, 2.5 inch minimum mounting depth required, decorator style faceplate not included | |
Dimensions | ||
Height | 4.12 in (105 mm) | |
Width | 3.50 in (89 mm) | |
Depth | 2.65 in (68 mm) | |
Weight | ||
14.2 oz (403 g) |
dm-tx-200-c-2g.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|