Call Now: 1-800-284-2288 |
DigitalMedia CAT Transmitter 100 |
|
|
The DM-TX-100 is a DM® CAT transmitter that provides a single HDMI® input for a computer or high-definition AV source as part of a complete Crestron® DigitalMedia™ system. It is ideal for use at a lectern, conference table, or any remote location in a boardroom, classroom, auditorium, or residence to route an HDMI signal to a display or switcher many feet away. The DM-TX-100 connects to the head end or display location using a single Crestron DM cable. In addition to HDMI, it includes an Ethernet port and USB HID device port for a total connectivity solution.
DM-TX-100 features include:
Video | ||
Input Signal Type | HDMI®, DVI[2], DisplayPort Multimode[2] | |
Output Signal Type | DM® CAT (DigitalMedia™ over twisted-pair copper wire) | |
Formats | HDMI w/Deep Color & 3D, DVI, HDCP content protection support | |
Input Resolutions, Progressive | 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
Input Resolutions, Interlaced | 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock | |
Output Resolutions | Matched to input | |
Audio | ||
Input Signal Type | HDMI, DisplayPort Multimode[2] | |
Output Signal Type | DM CAT | |
Formats | Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, Up to 8ch PCM | |
Communications | ||
DigitalMedia | DM CAT, DMNet®, HDCP management, EDID format management, CEC | |
Ethernet | 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP | |
USB | Supports USB HID class devices | |
Connectors | ||
HDMI IN | (1) 19-pin Type A HDMI female; HDMI digital video/audio input; Also supports DVI and DisplayPort Multimode[2] |
|
USB HID | (1) USB Type B female; USB device port for connection to the USB host interface of a computer or other USB HID-compliant host |
|
LAN | (1) 8-wire RJ45 female; 10Base-T/100Base-TX Ethernet port |
|
IR | (1) 2-pin 3.5mm detachable terminal block, IR/Serial port; IR output up to 1.1 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud |
|
DM OUT, D & M | (1) DM CAT output composed of (2) 8-pin RJ45 female, shielded; Connects to DM CAT input of a DM switcher, receiver/room controller, or other DM device via DM-CBL cable[1] |
|
DM OUT, G B A 24 | (1) 4-pin 3.5mm detachable terminal block, DMNet port; Connects to DMNet port of a DM switcher, receiver/room controller, or other DM device via DM-CBL cable[1] |
|
G | (1) 6-32 screw, chassis ground lug | |
DM Cable Length | ||
Cable Type: DM-CBL DigitalMedia Cable |
Maximum length without, between, before, or after repeaters:
Maximum total length using up to 2 repeaters:
|
|
Controls & Indicators | ||
PWR | (1) green LED, indicates operating power supplied via DMNet | |
DM LINK | (1) green LED, indicates DM Link status | |
HDMI IN | (1) green LED, indicates HDMI input signal presence and lock status | |
SETUP | (1) red LED and (1) miniature recessed pushbutton for Ethernet setup | |
RESET | (1) miniature recessed pushbutton for hardware reset | |
LAN | (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity | |
Power Requirements | ||
DMNet Power Usage | 9 Watts (0.38 Amps @ 24 Volts DC) | |
Environmental | ||
Temperature | 32° to 104°F (0° to 40°C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Heat Dissipation | 31 BTU/Hr | |
Enclosure | ||
Chassis | Aluminum w/polycarbonate label overlay and (4) integral mounting flanges | |
Mounting | Freestanding, surface mount, or attach to a single rack rail | |
Dimensions | ||
Height | 7.60 in (193 mm) | |
Width | 4.56 in (116 mm) | |
Depth | 1.43 in (37 mm) | |
Weight | ||
18.3 oz (517 g) |
dm-tx-100.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|