Eight Channel Fiber Optic CCTV System
|
|
By: Nitek
Video Transmission Solutions
|
Nitek's FSS20811S is an eight fiber channel Universal-Mode™ video and data system in which both video and data are transmitted over the same fiber. The FSS20811S is a complete system that includes transmitter and receiver units. Nitek's unique Universal-Mode™ optics allow the same unit to be used with single-mode or multi-mode fiber optic cabling types.
The 2000 Series fiber optic transmission systems are designed to provide point-to-point, broadcast quality video transmission at an affordable cost, without compromise. The video is transmitted in a real time full bandwidth digital format. This insures the highest quality regardless of distance. By transmitting the video in an uncompressed format, there is no latency or loss of video quality.
Transmitter and Receiver are equipped with LED indicators which provide power and link status.
FSS20811S features include:
- Real time digital video eliminates signal degradation associated with distance.
- Universal-ModeT allows the same unit to be used with multi-mode or single-mode fiber without any set up or field configuration.
- Directly supports all NTSC, PAL or SECAM video formats.
- 2000 Series Transmitters and Receivers are equipped with LED status indicators to provide at-a-glance power and link status
- Broad operating temperature range for use in protected outdoor applications.
System Specifications |
Chassis Cabinet |
19" Standard rack mount, 1 RU x 7.5" D |
Power Cords |
Standard IEC Equipment Power Cords |
Number of Channels |
Eight Channels |
Multi-mode |
50/125 or 62.5/125 to 1.2Km |
Single-mode |
9/125 to 20Km |
Wavelength |
Transmitter: TX 1310nm/RX 1550nm
Receiver: TX 1550nm/RX 1310nm |
Fiber Connector |
SC (IEC 61754-4) |
Signal to Noise Ratio |
65dB min. |
Operating Temperature |
-35 to 70 degrees C/ -31 to 158 degrees F |
Relative Humidity |
Up to 95% non-condensing |
Power Requirements |
+5VDC Power Pack (Provided) |
Dimensions |
5.0 x 4.0 x 1.0 including tabs and BNC |
Compression |
None, Uncompressed |
Input / Output Level |
1V p/p nominal |
Input / Output Impedance |
75 Ohm Unbalanced |
Bandwidth |
8Hz |
Differential Gain |
2% (typical) |
Differential Phase |
0.7 |
Tilt |
0.5% |
Power Connector |
2.5mm (ID) x 5.5mm (OD) Barrel |
Video Connector |
BNC |
Video Standard |
NTSC/PAL/SECAM |
Data Format |
RS422 (two wire)/RS485 (four wire) |
Data Direction |
Bi-directional |
Data rate |
Up to 300Kb/s |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.