Call Now: 1-800-284-2288 |
Ethernet over Coax EoC Transceiver with PoE Power |
|
|
The NVT Model NV-EC1701 Ethernet over Coax EoC Transceiver is a compact media converter that allows 10/100 BaseT Ethernet and PoE+ power to be transmitted using coax cable. These devices are often used in legacy installations where existing cable is re-deployed as part of an upgrade to IP cameras. 56 VDC class 2 power is delivered to one transceiver, which distributes it to multiple* remote transceivers, and their PoE, PoE+, or High Power PoE cameras*.
These transceivers are extremely simple to use, with no IP or MAC addressing required. Status LEDs indicate power and link connectivity/activity for RJ45 and BNC ports. They are backed by NVT’s award winning customer support and limited lifetime warranty.
Available Configurtations Include:
NV-EC1701-KIT1 1 - Camera EoC Transmission System; (2) NVEC1701, (1) NV-PS56-60W
NV-EC1701-KIT2 2 - Camera EoC Transmission System; (3) NVEC1701& (1) NV-PS56-60W, (1) NV-BNCT
NV-EC1701-KIT3 3 - Camera EoC Transmission System; (4) NVEC1701& (1) NV-PS56-60W, (1) NV-EC4BNC
NV-EC1701-KIT4 4 - Camera EoC Transmission System; (5) NVEC1701& (1) NV-PS56-60W, (1) NV-EC4BNC
NV-EC1701-K1H 1 - Camera EoC Transmission System; (2) NVEC1701,(1) NV-PS56-90W
NV-EC1701-K2H 2 - Camera EoC Transmission System; (3) NVEC1701& (1) NV-PS56-90W, (1) NV-BNCT
NV-EC1701-K3H 3 - Camera EoC Transmission System; (4) NVEC1701& (1) NV-PS56-90W, (1) NV-EC4BNC
NV-EC1701-K4H 4 - Camera EoC Transmission System; (5) NVEC1701& (1) NV-PS56-90W, (1) NV-EC4BNC
NV-EC1701 features include:
Connectivity | RJ45 Ethernet Interface: RJ45, auto-crossover Coax Building Wiring Interface: BNC, RG-59/U or similar 1 control room EoC transceiver plus up to 4 remote EoC transceivers are supported |
Wire Type | 4-pair Cat5 or better |
Distance | RJ45 Ethernet Interface: up to 328' (100 m) Coax Building Wiring Interface: up to 2,500' (750 m) 1 |
Speed | 10/100 Base T, half / full duplex, auto- negotiation, auto MDI / MDIX cross-over |
Latency | 3 ms |
Throughput | 80 Mbps ±10% useable bandwidth per network |
Power Output | This power sourcing equipment (PSE) supports powered devices (PDs) that are compatible with IEEE 802.3af, or PDs that draw up to 45 W Always on: 48 VDC outputs appear on pins 4 & 5 and 7 & 8, and are current-protected and transient-protected |
Impedance | 50 to 100 Ω |
Transmission Technology | OFDM, 128-bit AES encryption |
Power | Blue "Power On" |
Interface | BNC / RJ45: Green "Link" |
Consumption | 2 W @ 48 VDC per transceiver |
Power Supply | Power Supply: External inline, with an IEC380-C14 power inlet and 6' (1.8 m) line-cord Input Voltage: 100 to 240 VAC, 50/60 Hz A molded P1J 5.5 mm barrel connector provides a Class 2 (SELV) 48 VDC regulated output Use only the power cord provided with the unit or equivalent UL approved type SPT-2, SVT, or SJT, 18/3 AWG 100 to 240 VAC, 1 A, 140°F (60°C), maximum 15' (4.5 m) long One end with IEC380-C13 appliance coupler and the other end with NEMA 1015P or equivalent for country |
Operating Temperature | 14 to 122°F (-10 to 50°C) |
Storage Temperature | -22 to 158°F (-30 to 70°C) |
Humidity | 20 to 85% non-condensing |
Regulatory | UL Listed to IEC/UL 60950-1 complies with FCC part 15B limits |
nv-ec1701.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|