Call Now: 1-800-284-2288 |
(discontinued) 1/1.8" Monochrome GigE Camera |
|
This item is DISCONTINUED.
The JAI CM-200GE is a monochrome progressive scan camera with 2 million pixels resolution and GigE Vision interface. It utilizes the Sony ICX274 CCD and outputs 25 full frames/second in continuous (free-run) mode and up to 24 frames/second in external trigger modes. Higher frame rates can be achieved by using the Partial Scan or Vertical binning modes.
CM-200GE features-
→ C3 Compact series
→ 1/1.8" monochrome progressive scan CCD
→ 1620 (h) x 1236 (v) active pixels
→ 4.4 μm square pixels
→ 25 frames/second with full resolution
→ Partial scan and vertical binning
→ Unique sequencer function
→ Programmable GPIO
→ GigE Vision interface
Sensor | 1/1.8" CCD |
Pixel Clock | 65 MHz |
Frame rate full frame | 25 frames/second |
Active area | 7.13 (h) x 5.37 (v) mm |
Cell size | 4.4 x 4.4 micro m |
Active pixels | 1624 (h) x 1236 (v) |
Color | (CB-200 GE) Raw Bayer output, host-based interpolation |
Read-out modes, Full | 1624 (h) x 1236 (v) 25 fps |
Read-out modes, 1/2 partial scan | 1624 (h) x 616 (v) 43.82 fps |
Read-out modes, 1/4 partial scan | 1624 (h) x 308 (v) 69.59 fps |
Read-out modes, 1/8 partial scan | 1624 (h) x 156 (v) 97.96 fps |
Read-out modes, 2/3 partial scan | 1624 (h) x 824 (v) 35.07 fps |
Read-out modes, Region-of-interest (ROI) | User Definable. Memory read-out |
Sensitivity | (CM-200 GE) 0.21 Lux (On sensor, max. gain, shutter off, 50% video) |
S/N ratio | >50 dB(0 dB gain) |
Video output | GigE Vision, 8-bit or 10-bit |
Auto-iris lens video output | 0.7 Vp-p, enabled by internal switch |
Gain | Manual -3dB to 24 dB |
Synchronization | Internal X-tal, External hardware trigger via GPIO; Software trigger via GigE Vision |
GPIO Module, Input/output switch | Configurable 14-in/9-out switch (LUT) |
GPIO Module, Clock generator (one) | 12-bit counter based on 25MHz clock or Pixel Clock |
GPIO Module, Pulse generators (four) | 20-bit counters programmable for length, start point, stop point, repeat |
Hardware trigger modes | Continuous, Pre-Select, Pulse Width, Sequence (Gain, Shutter, ROI), Delayed Readout |
Electronic shutter, Pre-set shutter | 1/25 to 1/10,000 in 10 steps |
Electronic shutter, Programmable exposure | 2L to 1251L (64 micro m to 40ms) |
Electronic shutter, Exposure Time (Abs) | micro sec ?- user definable. Same range as PE |
Electronic shutter, Pulse Width | 32 micro s to 2 sec. |
Control interface | Register based GigE, Vision/GenICam compliant |
Functions controlled via GigE Vision interface | Shutter, Gain, Black level, Trigger mode, Readout mode, GPIO setup, ROI (GenICam mandatory functions) |
GigE Vision streaming control | Packet size: (1428 to 4040bytes), Delayed (frame) readout, Inter-packet delay, |
Indicators on rear panel | Power / Hardware trigger, GigE link, GigE activity |
Operating Temperature | -5°C to 45°C |
Humidity (operation) | 20 - 90% non-condensing |
Storage temp./humidity | -25°C to 60°C / 20 to 90% |
Vibration | 10G (20Hz to 200 Hz XYZ) |
Shock | 70G |
Regulations | CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS/WEEE |
Power | 12-24V DC /-10%. 4.2W (@12V) |
Lens mount | C-mount |
Dimensions | (H x W x L) 29 x 44 x 75 mm |
Weight | 125 g |
cm-200ge_cb-200ge.pdf | Datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|