Call Now: 1-800-284-2288 |
1/3" SXGA HDR (2-CCD) GigE Camera |
|
The JAI AD-130GE is a prism-based 2-CCD progressive area scan camera capable of simultaneously capturing visible and near-infrared light spectrums through the same optical path using two individual channels.
The first channel has a Bayer mosaic color imager that captures visible light, while the second channel has a monochrome sensor for capturing near infrared light.
The AD-130GE camera is designed around Sony's ICX447 CCD series (1296 x 966 pixels) for 1.3 megapixels of resolution per channel. In addition to providing greater resolution than JAI's 0.8-megapixel AD-080 multi-spectral cameras, the ICX447 offers more than twice the NIR sensitivity of the AD-080's ICX204 to simplify illumination requirements.
The AD-130GE runs at 31 frames per second in continuous operation, and can achieve faster frame rates of up to 145 fps using user-definable partial scanning.
The camera features built-in pre-processing functions which include blemish compensation, shading compensation, Bayer to RGB interpolation, LUT/gamma correction and knee control.
The GigE Vision interface is selectable to 8-bit, 10-bit or 12-bit (packed) output for the NIR channel, with the visible channel providing either 8-bit, 10-bit or 12-bit raw Bayer output or 24-bit or 30-bit RGB interpolated output. The camera features standard C-mount lenses, giving a high degree of lens flexibility.
Separate exposure times for each channel allow mutual adjustment without changes in gain, maintaining a consistent signal-to-noise ratio. JAI's comprehensive SDK and Control Tool package is available free of charge for Windows XP, Vista, 7 and Linux systems. A variety of third-party GigE Vision software packages and libraries are also supported.
Sensor, Visible | 1/3" color Bayer mosaic IT CCD (ICX447) |
Sensor, Near-IR | 1/3" Monochrome IT CCD (ICX447) |
Pixel Clock | 51.324 MHz |
Frame rate full frame | 31 frames/sec. |
Active area | 4.86 (h) x 3.63 (v) mm |
Cell size | 3.75 (h) x 3.75 (v) µm |
Active pixels | 1296 (h) x 966 (v) |
Read-out modes - Full | 1296 (h) x 966 (v) 31.484 fps |
Read-out modes - Variable partial scan | Programmable start line: 0 to 962 Programmable height: 8 to 966 lines |
Sensitivity - Visible | 0.4 Lux (max. gain, shutter off, 50% video) |
Sensitivity - Near-IR | 0.02 µW/cm2 at 800nm (max. gain, shutter off, 50% video, f/2.2) |
S/N ratio - Visible | >52dB (Green ch., 0 dB gain, 10-bit) |
S/N ratio - Near-IR | >54 dB (0 dB gain, 10-bit) |
Video output - Visible | 30/24-bits RGB or 8, 10 or 12-bit raw Bayer |
Video output - Near-IR | 8, 10, or 12-bit monochrome |
Auto-iris lens video | 0.7 Vp-p, w/o sync |
Gain | Master gain: 0 dB to 21 dB (visible) -3 dB to 21 dB (NIR) R/B gain: -7 dB to 10 dB (visible only) AGC: 0 dB to 21 dB |
Synchronization | Int. X-tal |
GPIO Module | Input/output switch: Configurable 14-in/32-out switch Clock generator (one): 12-bit counter based on pixel clock Pulse generator (four): 20-bit counters with programmable length, start point, stop point, repeat |
Hardware trigger modes | Edge Pre-select, Pulse Width Control, Reset Continuous, Frame Delay, Sequence |
Electronic shutter | Exposure time Abs: 0.4L (11.49 µs) to 982L (31.761 ms) in 1L steps(28.725 µs) Pulse Width Control: 1/13,000 sec. (2.4L) to 2 sec. GPIO plus Pulse Width: Fine adjustment via GPIO Auto shutter: 1/31 to 1/366 sec. (982L to 95L) |
White balance | Visible (color channel) only Gain range: -7 dB to 10 dB 2800K to 9000K |
LUT/Gamma | 1.0/0.6/0.45/LUT |
Functions controlled via GigE Vision interface | Shutter, gain, black level, trigger mode, read-out mode, GPIO setup, ROI (GenICam mandatory functions) |
GigE streaming protocol | Packet size (1476 to 16020 bytes), delayed (frame) read-out, inter-packet delay |
Indicators on rear panel | Power/hardwire trigger,GigE link /activity |
Operating Temperature | -5°C to 45°C |
Humidity (operation) | 20 - 80% non-condensing |
Storage temp./humidity | -25°C to 60°C / 20 to 80% non-condensing |
Vibration | 3 G (15Hz to 200 Hz XYZ) |
Shock | 50G |
Regulations | CE (EN 61000-6-2, EN-61000-6-3), FCC part 15 class B, RoHS |
Power | 12-24V DC ± 10%. 8.0 W typical (full frame @ 12V) |
Lens mount | C-mount (Max 4.0 mm thread) (Use 3CCD-type lens without IR filter) |
Dimensions (H x W x L) | 55(H) x 55(W) x 98.3(D) mm |
Weight | 340 g |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|