Image sensor | 1/3-type progressive scan IT CCD
|
Image sensor (Number of effective pixels, H x V) | 1,296 x 966
|
Cell size (H x V) | 3.75 μm x 3.75 μm
|
Output pixels (H x V) | 1,280 x 960
|
Output pixels (H x V, Full resolution) | 1,296 x 966
|
Color filter | –
|
Frame rate | 31 fps
|
Minimum illumination (50%) | 0.5 lx (Iris: F1.4, Gain: 18 dB, Shutter: 1/30 s)
|
Sensitivity | F5.6 (400 lx, Gain: 0 dB)
|
S/N ratio | More than 50 dB
|
Gain | Auto, Manual: 0 dB to 18 dB
|
Shutter speed | 2 s to 1/100,000 s
|
White balance | –
|
Readout modes | Normal, Binning (2 x 1, 1 x 2, 2 x 2), Partial scan
|
Readout features | Binnarization, Gamma (variable), Built-in test pattern, LUT
|
Synchronization | Hardware trigger, Software trigger
|
Trigger modes | Edge detection, Pulse width detection, Bulk Trigger, Sequential Trigger
|
Memory channel (Usersets) | 16 channels
|
User memory | 32 kbytes 64 bytes x 16ch
|
Other features | Shading correction, Defect correction, Temperature readout
|
Video data output | 8, 10, 12-bit, digital
|
Digital interface | LVDS
|
Camera specification | PoCL, CameraLink® Version1.2
|
Output data clock | 50 MHz (1 tap), 25 MHz (2 tap)
|
Digital input/output | TTL IN (x3), TTL OUT (x3)
|
Lens mount | C mount
|
Power requirements | DC 12 V ( 10.5 V to 15.0 V)
|
Power consumption | 2.4 W (typical)
|
Operating temperature | 23°F to 113°F (-5°C to 45°C)
|
Performance guarantee temperature | 32°F to 104°F (0°C to 40°C)
|
Storage temperature | -22°F to 140°F (-30°C to 60°C)
|
Operating humidity | 20% to 80% (no condensation)
|
Storage humidity | 20% to 95% (no condensation)
|
Vibration resistance | 10 G (20 Hz to 200 Hz)
|
Shock resistance | 70 G
|
Dimensions (W x H x D) | 1 3/16 x 1 3/16 x 1 3/16 inches (29 x 29 x 30 mm) (excluding protrusions)
|
Weight | 2.0 oz (56 g)
|
Regulations | UL60950-1, FCC Class A, CSA C22.2-No.1, IC Class A Digital Device, CE: EN61326 (Class A), AS EMC: EN61326, VCCI Class A, KCC
|
Supplied accessories | Lens mount cap (1), Operating instructions (1)
|
Shading Correction | Minimizes uneven image intensity caused by lighting conditions.
|
Defect Correction | Automatically minimizes defective pixels directly inside the camera.
|
Temperature readout | Eliminates the need for a separate sensor and simplifies system configuration.
|
Memory Channel | Up to 16 sets of camera parameters can be stored in addition to the factory default settings.
|
Bulk Trigger Modes | Allows the camera to capture up to 16 images in rapid succession using a single hardware or software trigger.
|
Sequential Trigger Mode | Allows the camera to capture a single image using successive setups stored in the memory channel.
|