Panel | OLED panel
|
Picture size (diagonal) | 24 5/8 inches (623.4 mm)
|
Effective picture size (H x V) | 21 1/2 x 12 1/8 inches (543.4 x 305.6 mm)
|
Resolution (H x V) | 1920 x 1080 pixels (Full HD)
|
Aspect | 16:9
|
Pixel efficiency | 99.99%
|
Panel drive | RGB 10-bit
|
Viewing angle (panel specification) | 89°/89°/89°/89° (typical) (up/down/left/right, contrast > 10:1)
|
Composite input (NTSC/PAL) connector | BNC type (x1), 1 Vp-p ±3 dB sync negative
|
Y/C input connector | Mini-DIN 4-pin (x1); Y: 1 Vp-p ±3 dB sync negative, C: 0.286 Vp-p ±3 dB (NTSC burst signal level); 0.3 Vp-p ±3 dB (PAL burst signal level)
|
RGB/component input connectors | BNC type (x3), RGB: 0.7 Vp-p ±3 dB (Sync On Green, 0.3 Vp-p sync negative); Component: 0.7 Vp-p ±3 dB (75% chrominance standard color bar signal)
|
External synchronized input connector | BNC type (x1); 0.3 Vp-p to 4.0 Vp-p ± bipolarity ternary or negative polarity binary
|
HD15 input connector | D-sub 15-pin (x1); R/G/B: 0.7 Vp-p, sync positive (Sync On Green, 0.3 Vp-p sync negative); Sync: TTL level (polarity free, H/V separate sync); Plug & Play function: corresponds to DDC2B
|
DVI-D input connector | DVI-D (x1), TMDS single link
|
Parallel remote | Modular connector 8-pin (x1)
|
Serial remote (LAN) | D-sub 9-pin (RS-232C) (x1); RJ-45 modular connector (x1) (Ethernet, 10BASE-T/100BASE-TX)
|
Optional input port | 2 ports, Signal format: H: 15 kHz to 45 kHz, V: 48 Hz to 60 Hz
|
DC IN connector | XLR-type 4-pin (male) (x1), DC 5 V/24 V (output impedance 0.05 ohms or less)
|
Composite output connector | BNC type (x1), Loop-through, with 75 ohms automatic terminal function
|
Y/C output connector | Mini-DIN 4-pin (x1), Loop-through, with 75 ohms automatic terminal function
|
RGB/component output connectors | BNC type (x3), Loop-through, with 75 ohms automatic terminal function
|
External synchronized output connector | BNC type (x1), Loop-through, with 75 ohms automatic terminal function
|
Power - OLED monitor (PVM-2551MD) | DC IN: 24 V/5.0 A, 5 V/0.030 A (Supplied from AC adaptor)
|
Power - AC Adaptor (Sony, AC-110MD) | AC IN: 100 V to 240 V, 50/60 Hz, 1.53 A to 0.58 A; DC OUT: 24 V/5.0 A, 5 V/0.060 A
|
Power consumption | Approx. 135 W (max.); Approx. 80 W (average power consumption in the default status)
|
Operating conditions - Temperature | 32°F to 95°F (0°C to 35°C)
|
Operating conditions - Recommended temperature | 68°F to 86°F (20°C to 30°C)
|
Operating conditions - Humidity | 30% to 85% (no condensation)
|
Operating conditions - Pressure | 700 hPa to 1060 hPa
|
Storage and transport temperature | –4°F to 140°F (–20°C to 60°C)
|
Storage and transport humidity | 0% to 90% (no condensation allowed)
|
Storage and transport pressure | 700 hPa to 1060 hPa
|
Dimensions (W x H x D) | 24 3/8 x 14 7/8 x 4 1/8 inches (618.4 x 376 x 102.1 mm) (without a stand); 24 3/8 x 18 5/8 x 12 inches (618.4 x 471.5 x 302 mm) (with SU-560 optional stand)
|
Mass | 17 lb 14 oz (8.1 kg) (when the optional stand and the input adaptor are not installed); 18 lb 12 oz (8.5 kg) (when the optional stand is not installed and two BKM-229X are installed)
|
Accessories supplied | AC adaptor (AC-110MD) (1), AC power cord (1), AC plug holder (2), Instructions for Use (1), CD-ROM (1), Using the CD-ROM Manual (1), Quick Reference (1), When You First Use the Monitor (1), Sales Companies Guide (1)
|
Optional accessories | SDI 4:2:2 input adaptor (BKM-220D) (1), HD/D1-SDI input adaptor (BKM-243HS) (1), NTSC/PAL input adaptor (BKM-227W) (1), Analog component input adaptor (BKM-229X) (1), 3G/HD/SDI input adaptor (BKM-250TG) (1), DVI-D input adaptor (BKM-256DD) (1), Monitor stand (SU-560) (1)
|
16 | 9 Aspect Ratio
|