8 Position Sequencing Video Switcher
|
The American Video Equipment 8PSWT is an eight position alarming, homing, bypassing sequential video switcher. Two alarm inputs via rear cage clamp connectors allow homing to camera 4 or camera 8 in a manual mode. Upon release of the alarm inputs, the switcher continues from where it left off prior to the alarm occurrence. Front panel LED indicators show which camera is currently being homed. The three position toggle switches allow instant manual homing, camera bypassing except upon alarm, and auto sequencing mode. There are two separate recessed Dwell pots to control the dwell time of cameras 1-4 and 5-8 independently.
The 8PSWT is powered by 9-12VDC and is supplied with a UL approved wall transformer.
Available Configurations Include:
12PSWT |
12 Position Sequential, Homing, Bypassing, 3ch, Alarm Switcher |
Video Inputs (Parent & Inset) |
1VP-P 75 ohm terminated; toggle switch selectable |
Toggle Positions |
BYpass, Sequence & Home |
Video Outputs |
1VP-P ohms terminated or unterminated |
Dwell Adjust |
Front panel recessed pot |
Dwell Time |
From approximately .2 seconds to 1 minute |
Power |
5-12VDC |
Power Supply |
9-12VDC @ 100 mA |
Camera Position |
LED indicators (8) RED |
Connectors |
|
Video In/Out |
BNC |
Power Input |
DC Coax 2.1mm x 5.5mm |
Alarm Input |
Screw terminal with quick disconnect |
Mechanical |
|
Case |
Beige Metal 5.13 W x 4.90 L x 1.38 H |
Weight |
1.20kg. (2.64lbs.) |
Box Size |
9.0 W x 5.125 L x 1.5 H |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.