1/1.8" Interline Progressive CCD UXGA 315 fps 1624 x 1236 Monochrome Camera
|
|
By: Sentech
Industrial, USB, & Medical Cameras
|
The STCPOGE202A is part of Sentech's Power Over Ethernet GigE camera line. It features a 1/1.8" monochrome UXGA sensor, 15fps and communication over a 12 pin Hirose or Ethernet connector.
The STC POGE202A boasts precision housing with accurate CCD alignment, a DC Auto Iris Lens Driver, a user-programmable Area of Interest (AOI) and a Gamma Table that can be imported. This camera meets all industry standards for GigE Vision� and GenICam�.
→ 1/1.8" CCD Image Sensor
→ UXGA (2 Megapixel), 15fps
→ PoE (Power Over Ethernet)
Imager | 1/1.8” Interline UXGA monochrome progressive CCD: ICX274AL
|
Total Picture Element | 1688 (H) x 1246 (V)
|
Active Picture Element | UXGA: 1624 (H) x 1236 (V)
|
Chip Size | 8.5 (H) x 6.8 (V) mm
|
Cell Size | 4.4 (H) x 4.4 (V) µm
|
Scanning System | Progressive
|
Vertical Frequency (Frame Rate) | 15.31668 Hz at full resolution 0.29261 to 61.26674 Hz adjustable via the communication Maximum frame rate depends on the AOI setting Maximum frame rate of the camera(61.26674) is 230 vertical resolution AOI setting
|
Horizontal Frequency | 19.1761 kHz
|
Pixel Frequency | 36.8181 MHz
|
Noise Level - @ 8bit output | ≤ 3 Digit (Gain 0 dB)
|
Noise Level - @ 10bit output | ≤ 12 Digit (Gain 0 dB)
|
Noise Level - @ 12bit output | ≤ 48 Digit (Gain 0 dB)
|
Minimum Scene Illumination | 0.16 Lux at F1.2, 15.31668 Hz
|
Sync System | Internal
|
Video Output | Digital 8, 10 or 12 bit Raw Data
|
Interface | PoE: IEEE802.3af CLASS3 (1000BASE-T)
|
Protocol | GigE Vision® 1.2 and GenICam™ 2.0 compliant
|
Shutter Speed | Preset continuous mode: 10 useconds to 16,777,216 useconds Preset trigger mode: 10 useconds to 16,777,216 useconds Pulse width mode: 10 useconds to Unlimited
|
ALC | Auto iris lens, electronic iris and AGC (ON/OFF)
|
Gain | 0 to 20.4 dB
|
Gamma | Gamma 1.0 (Factory default) or uploadable gamma table
|
AOI Function | Programmable AOI setting via the communication
|
Smear Reduction | Selectable ON/OFF via the communication
|
Color Interpolation | N/A
|
White Balance Function | N/A
|
Trigger Mode | Edge preset trigger, Pulse width trigger (unlimited long exposure)
|
Communication | UART Communication through Ethernet port
|
I/Os | 3 opto-isolated inputs and 5 opto-isolated outputs
|
Auto IRIS lens control | DC IRIS control input with video level target, peak/average and zone weight settings via the communication
|
Power - Input Voltage | 10.8 to 26.4 Vdc through power/IO connector or Power Over Ethernet (Auto detection with power/IO connector prioritized)
|
Power - Consumption | < 5.0 W
|
Dimensions | 50 (W) x 50 (H) x 53.5 (D) mm excluding connectors
|
Optical Filter | No filter
|
Optical Center Accuracy | Positional accuracy in H and V directions: /0.3 mm Rotational accuracy of H and V: /1.5 deg.
|
Material | Aluminum (AC)
|
Lens Mount | C mount
|
Connectors | RJ45 connector Power/IO connector: HR10A-10R-12PB (Hirose) or equivalent DC IRIS lens connector: M1951 (EMUDEN) or equivalent
|
Camera Mount Screws | Two 1/4” Tripod screw holes: (One on each top and bottom plate), Sixteen M4 screws holes: (Four on each top, bottom and both side plate)
|
Weight | Approximately 170 g
|
Operating Temperature | -5 ~ 40 deg C
|
Storage Temperature | -30 ~ 65 deg C
|
Vibration | 20Hz to 200Hz to 20Hz (5min./cycle), acceleration 10G, 3 directions 30 min. each
|
Shock | Acceleration 38G, half amplitude 6ms, 3 directions 3 times each
|
Standard Compliancy | TBD
|
RoHS | RoHS Compliant
|
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.