Portable Battery-Powered 3G-SDI to HDMI Cross Converter
|
The Marshall Electronics OR-XDI is a rugged and portable battery-powered HDMI to 3G-SDI / 3G-SDI to HDMI cross converter. It allows an HDMI video signal to be converted from HDMI to 3G-SDI (with audio) to feed two other monitor sources on location. It can also be used to take the 3G-SDI output from production cameras to feed both the HDMI input of an external monitor while simultaneously feeding the 3G-SDI to other locations and equipment.
The OR XDI can be powered using a consumer-type 12V EIA power adapter, optional 4-pin XLR, or by using a wide variety of Marshall small battery mounts. This is the perfect tool for any director, camera operator, or production video village.
→ Battery operable 7.2V or 14.4V
→ (includes one Marshall small battery plate of choice)
→ Choose between 1 x 3G-SDI Input or 1 x HDMI Input
→ Simultaneously outputs two 3G-SDI signals and one HDMI signal at the same time
→ HDI-to-SDI / SDI-to-HDMI conversion including Audio
→ Automatic input port switching
→ Automatic video format detection
→ Built-in SD format interlacer for DSLR while recording (480p to 480i conversion)
→ Status LEDs indicate link speed and health
→ Consumes 50% less energy and operates twice as long as competing converters
→ Built-in Color Bar
→ Test Pattern Generator
→ 8-position piano switch (input port selection, power save)
→ USB service port for future upgrades
→ Rugged metal alloy case
→ Dual size mounting holes (1/4-20)
→ EIA 12VDC External Power Jack
→ 4-pin XLR 12VDC Input available as an option
→ 3.91" W x 2.28" D x 1.38" H
→ Weighs only 7.6 ounces (without battery)
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.