Broadcast Headsets: Electret Condenser Cardioid Microphone
|
The Sennheiser closed and supra-aural headsets HME26600(4)XQ are lightweight and designed for use in studio applications at TV and Radio. The headphones are dimensioned for high maximum SPL. HME 26 600(4) XQ provides high wearing comfort in combination with a good noise attenuation. All variants of HME 26 for Broadcast are equipped with ActiveGard which protects the user from volume peaks.
The omni-directional condenser microphone satisfies with perfect acoustic performance and ensures linear frequency response. The gooseneck microphone can be used either on left or right-hand side. The microphone boom allows an individual adjustment at the right position.
600 Ohm per system, pre-polarized condenser microphone (cardioid) BKE 4-4, steel cable with connector XLR-3 and 1/4 inch jack, 3 foot length.
(Kit) USHME26-600(4)-XQ = 504204 502460 (headset and steel cable with XLR-3 and 1/4" jack)
→ Lightweight
→ Extremely comfortable to wear, even for extended listening, due to the two-piece automatic headband and soft ear pads
→ Single-sided cable routing
→ Headphones for high maximum SPL
→ ActiveGard (switchable) – safeguards you from volume peaks above 105 dB
→ “Flip-away” headphone allows single-sided listening
→ Pre-polarized condenser microphone (omni-directional) with linear frequency response
→ Flexible microphone boom, can be worn on either left or right-hand side
→ Muting of microphone once mic position is upright
→ Cable, microphone boom and ear pads can be changed easily due to modular concept
→ Warranty 2 years
Transducer principle | dynamic, closed
|
Ear coupling | supra-aural
|
Frequency response | 20 Hz - 18,000 Hz
|
Impedance | 300Ω mono / 600Ω stereo
|
Characteristic SPL (1 kHz, 1 mW) | 105 dB (ActiveGard switched off)
|
Characteristic SPL | 107 dB at 1 kHz, 1V
|
Max. sound pressure level (active) | 127 dB SPL at 1kHz, 200mW (ActiveGard switched-off) 105 dB @ 1kHz (ActiveGard on)
|
Total harmonic distortion (THD) | <0.5%
|
Contact pressure | approx 3.6N
|
Transducer principle (microphone) | pre-polarized condenser microphone (cardioid) BKE 4-4
|
Frequency response (microphone) | 40 Hz - 20,000 Hz
|
Output voltage | 4 mV/Pa±2.5 dB
|
Operating voltage (stand alone) | 5V - 15 VDC
|
Operating temperature | -15 °C... 55 °C
|
Storage temperature | -55 °C... 70 °C
|
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.