8-Channel, 1000W Powered Mixer
|
|
By: Mackie
Professional Audio / Video Products
|
Ultra-light and completely self-contained, the Mackie PPM608 Professional Powered Mixer features two ridiculously robust power amps for mains and/or monitors (500W + 500W). With 1000 watts of system power, this mixer provides more raw power than the competition. Things can get pretty intense out there and your gear needs to be able keep up the pace. We custom designed the PPM608 with Class-D amps, which run cool and boast maximum efficiency to keep your sound pumping until they start kicking people out. We had to include Mackie’s proven Fast Recovery circuitry, eliminating the risk of pesky amp latching. The result is a distortion free mix even when pushing peak levels. The built-in limiter can go toe-to-toe with the most popular outboard stereo limiters used in live sound today, protecting your speakers from damage. The limiter’s attack and release times are specifically selected to address full-bandwidth music and will not muddy things up by adding any unwanted pumping. PPM mixers are surprisingly lightweight, but tremendously powerful. You can push the PPM608 to its maximum output, distortion free!
PPM608 features include:
- Fully featured 8-channel, 1000W, Ultra-Light Professional Powered Mixer with onboard 32-bit digital RMFX+ processor
- Dual 500W Mackie designed Class D, Fast Recovery power amplifiers
- 32-bit RMFX+processor featuring 24 sane, useable reverbs, choruses, and tap delay for live applications
- 8 premium Mackie mic preamps with 48V phantom power and TRS inserts (ch 1-6)
- Single In-line Compression (SIC) provides increased presence and punch for vocals and instruments
- 2 stereo inputs with dual RCA and dual 1/4-inch line inputs for flexible connectivity
- Mackie's Musical 3-Band Active channel EQ (80hz, 2.5kHz, 12kHz)
- 2 built-in DI boxes for direct instrument connections
- Separate Monitor and FX auxiliary sends
- 12 segment LEDs for the Main and Monitor outputs
- Dual 7-Band graphic EQ on the Mains and Monitor outputs for tuning rooms and monitor mixes
- 3-Mode Amplifier for ultra-flexible routing, switchable as Mains Stereo L/R, Mono Mains/Monitor 1, or Mon 1 & Mon 2
- Precision Passive EQ for enhanced clarity and LF response with Mackie passive loudspeakers
- Rugged metal handles built into the sides of the mixer case for easy transport from gig to gig.
- Classic Mackie rounded front chassis design. If the PPM rolls on its face during transport the controls are recessed and protected
- Ultra-Lightweight and portable
AC Power Requirements |
|
US |
100 �- 120 VAC, 50 �- 60 Hz, 160W |
EU |
200 �- 240 VAC, 50 �- 60 Hz, 160W |
AC Connector |
3-pin IEC 250 VAC |
Operating Temperature |
0˚ �- 40˚C (32˚ �- 104˚F) |
Physical Properties (packaged product) |
|
Height |
15.2 in / 386 mm |
Width |
22.1 in / 561 mm |
Depth |
15.2 in / 386 mm |
Shipping Weight |
30.6 lb / 13.9 kg |
Physical Properties (product) |
|
Height |
12.3 in / 314 mm |
Width |
19.3 in / 490 mm |
Depth |
11.4 in / 290 mm |
Weight |
24.8 lb / 11.2 kg |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.