|
By: Mackie
Professional Audio / Video Products
|
The Mackie MR-5MK2 value proposition is simple. As a professional studio monitoring solution, MRmk2s are extremely balanced, outputting high-frequency clarity and midrange definition you can stake your reputation on. Furthermore, they out-power any competitively-priced monitor solution and deliver deeper, more accurate bass than anything in their class. Perfect for professional and home studios, as well as home theaters and multimedia applications, MRmk2 monitors deliver a rich sonic experience and the power, performance and clarity you need to create world-class mixes.
The MR 5MK2 studio monitors feature all-new professional transducers specifically designed to meet the demands of the modern project studio. The neodymium magnet-driven silk dome tweeter is both smooth and accurate, featuring ferro-fluid cooling to help protect against power compression during wide dynamic playback. Meanwhile, the hyperbolic curved cone woofer, inverted dust cap and long voice coil winding work in tandem to deliver smooth, consistent output with controlled low frequency performance. When paired with our precision-tuned amplifiers, MRmk2 monitors provide spot-on input-to-output tuning that you can take to the bank.
→ System Specifications
→ Physical Properties
→ High resolution Active studio reference monitor
→ Ultra-linear frequency response for accurate mix translation
→ 6.7-inch high-precision, low-distortion LF transducer
→ 1-inch titanium dome, ferrofluid cooled tweeter
→ Optimized Waveguide for wide, even sweet zone
→ Twin FR Series amps — 100W for LF / 40W for HF
→ Cast aluminum Zero Edge Baffle™ minimizes diffraction
→ Full internal damping eliminates midrange artifacts
→ Passive radiator provides tight, articulate bass extension down to 45Hz
→ Acoustic Space, LF roll-off, and HF controls
→ Balanced XLR, TRS, and unbalanced RCA inputs
→ OmniMount™ ready for easy wall/ceiling placement
→ THX pm3™ certified for surround sound applications
→ Perfect for High-Definition audio, cinema and gaming systems
Input Type | Balanced Differential (XLR and 1/4" TRS); Unbalanced (RCA)
|
Input Impedance | 20 kΩ Balanced; 10 kΩ Unbalanced
|
Input Protection | RFI and Level Protected
|
Maximum Input Level | 20 dBu
|
Low Frequency Filter | 80 Hz, 2nd Order, Butterworth
|
HF Equalization | Shelving ±2 dB @ 10 kHz
|
Acoustic Space |
|
A position | –4 dB @ 50 Hz, shelving
|
B position | –2 dB @ 50 Hz, shelving
|
C position | Flat
|
Compressor | Independent high and low frequency overload detection
|
Enclosure Alignment | 6th Order
|
Over Excursion Prevention | 2nd Order High-Pass Filter
|
Low Line Voltage Shut Down | 60% of Nominal Line
|
Thermal Protection | Amplifier Shut-Down, Auto Reset
|
Muting | 5 seconds at turn-on
|
Signal Sense Threshold | –74 dBu (0.155 mV)
|
Driver Protection | Independent LF and HF Detection; Overall Compression
|
Height | 13.1 in/33.3 cm
|
Width | 8.6 in/21.9 cm
|
Depth Enclosure | 10.3 in/26.2 cm
|
Depth Overall | 12.6 in/31.9 cm
|
Internal Volume | 0.29 cubic feet (8.2 liters)
|
Weight | 23.4 lb/10.6 kg
|
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.