Seismic Certified 19" Open Frame Racks
|
The Middle Atlantic R2-Series rack shall be welded and include two
3-1/4” wide, 11-gauge steel vertical channels with 10-32 tapped mounting holes with marked
rackspace increments to speed equipment mounting. Base shall be 3/8” thick steel and include
one 1/4-20x1 grounding stud. R2 Series enclosures shall satisfy the 2007 & 2010 CBC; 2006,
2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009
editions of NFPA 5000 for use in areas of high seismicity, Seismic Use Group III, Zone 4 or Seismic
Design Category (SDC) “D” with lateral force requirements for protecting 850 lbs. of essential
equipment in locations with the highest level of seismicity and top floor or rooftop installations
with an Importance factor (Ip) of 1.5.
The R2 shall be GREENGUARD Indoor Air Quality Certified for
Children and Schools. R2 series shall be RoHS EU Directive 2002 / 95 / EC compliant. R2 shall be
manufactured by an ISO 9001 and ISO 14001 registered company. R2 rack shall be warrantied
to be free from defects in material or workmanship under normal use and conditions for the
lifetime of the rack.
→ Fully welded steel construction for structural integrity
→ 1/8” thick steel rail channels are 10-32 threaded front and rear
→ Heavy duty 3/8” thick steel base
→ Hole pattern on top allows for installation of a variety of cable ladders
→ Grounding stud installed in base
→ Durable black powder coat finish
Seismic certified to the following codes and standards | 2007 & 2010 CBC; 2006, 2009 & 2012 IBC; ASCE 7-05 (2005 Edition) & ASCE 7-10 (2010 Edition) and the 2006 & 2009 editions of NFPA 5000 for use in areas of high seismicity – Zone 4 or Seismic Design Category (SDC) "D". These are designed for Mission Critical and/or High-Importance Installations in locations with the highest level of seismicity and top floor or rooftop installations including those within UBC and CBC Essential facilities or IBC, ASCE 7, and NFPA 5000 Seismic Use Group III facilities. For all codes, the Importance factor (Ip) is 1.5. Seismic Certified load capacity of 850 lbs.
|
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.