HDMI, Data & IR Over Twisted Pair Transceiver
|
|
By: Kramer
Video & Computer Signal Processing Solutions
|
The TP-576 is a twisted pair (DGKat) line driver for HDMI, bi-directional RS-232 and infrared signals. The TP 576 receives an HDMI signal either from a local HDMI source or from a compatible twisted pair transmitter. It decodes the selected signals to the local HDMI, RS-232 and IR outputs and simultaneously transmits them to a compatible twisted pair receiver.
→ HDTV Compatible
→ HDCP Compliant
→ 3D Pass-Through
→ Active Input/Output LED Indicators
→ Inputs |
1 HDMI connector; 1 CAT 5 on an RJ-45 connector |
→ Outputs |
1 CAT 5 on an RJ-45 connector; 1 HDMI connector |
→ Ports |
1 bi-directional IR port on a 3.5mm mini jack, 1 bi-directional RS 232 port on a 9-pin D-sub connector (for local control) |
→ Bandwidth |
Supports up to 2.25Gbps bandwidth per graphic channel |
→ Compliance with HDMI Standard |
Supports HDMI and HDCP |
→ RS-232 Baud Rate |
Up to 38.4kbps |
→ Controls |
EDID SETUP button, input select button |
→ Indicator LEDs |
IN 1, IN 2, OUT 1, OUT 2, and ON LEDs |
→ Power Source |
12V DC, 950mA |
→ Dimensions |
12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95"), W, D, H |
→ Weight |
0.3kg (0.67lbs) approx |
→ Accessories |
Power supply, bracket installation kit |
→ Options |
RK-T2B 19" rack mount, Kramer remote external receiver, Kramer BC DGKat524 (CAT 5 24AWG), BC DGKat623 (CAT 6 23AWG) and BC DGKat7a23 (CAT 7a 23 AWG) cables, HDMI/HDMI male-to-male cables |
→ HDMI Support |
HDMI (V.1.4 with Deep Color (on the HDMI input), x.v.Color, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD) |
→ DGKat Signal Integration |
Kramer's unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat cables designed specifically for optimum performance |
→ EDID PassThru |
Passes EDID/HDCP signals from source to display |
→ HPD Pass Thru |
Passes hot plug detect signals from display to source |
→ System Range |
Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat7a23 cable |
→ Cable |
For optimum range and performance, use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat7a23 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground |
→ Flexible Control |
Front panel, RS-232 & IR switching |
→ Power Connect System |
A single connection to the TP-576 powers the transmitter, receiver and line driver units |
→ Compact MegaTOOLS |
2 units can be rack mounted side-by-side in a 1U rack space with the optional RK-T2B universal rack adapter |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.