HDMI, Bi-directional RS-232 & IR Over Twisted Pair Transmitter
|
|
By: Kramer
Video & Computer Signal Processing Solutions
|
The TP-573 is a twisted pair transmitter for HDMI, bi-directional RS-232 and infrared signals. The TP 573 converts the input signals to a twisted pair signal and the TP-574 converts it back to HDMI, RS-232 and infrared signals.
→ HDTV Compatible
→ HDCP Compliant
→ 3D Pass-Through
→ Inputs |
1 HDMI connector, 1 bi-directional IR port on a 3.5mm mini jack, 1 bi-directional RS-232 port on a 9-pin D-sub connector |
→ Outputs |
1 CAT 5 OUT on an RJ-45 connector |
→ Bandwidth |
Supports up to 1.65Gbps bandwidth per graphic channel |
→ Compliance with HDMI Standard |
Supports HDMI and HDCP |
→ Power Source |
12V DC, 510mA |
→ Dimensions |
12.1cm x 7.18cm x 2.42cm (4.76" x 2.83" x 0.95"), W, D, H |
→ Weight |
0.3kg (0.67lbs) approx |
→ Accessories |
12V DC power supply |
→ Options |
RK-3T 19" rack mount, Kramer remote external receiver, Kramer BC DGKat524 (CAT 5 24AWG) and BC DGKat623 (CAT 6 23AWG) cables |
→ HDMI Support |
HDMI (V.1.4 with Deep Color, x.v.Color, Lip Sync, HDMI Uncompressed Audio Channels, Dolby TrueHD, DTS-HD) |
→ EDID PassThru |
Passes EDID/HDCP signals from source to display |
→ bi-directional RS-232 & IR Interface. |
38400 max baud rate |
→ DGKat Signal Integration |
Kramer's unique technology for converting TMDS as well as control and communication to signals that run over twisted pair cables. We strongly recommend using Kramer DGKat cables designed specifically for optimum performance |
→ System Range |
Up to 90m (295ft) at 1080i, or up to 30m (98ft) at 1080p on shielded BC-DGKat524 cable. Up to 90m (295ft) at 1080i, or up to 70m (230ft) at 1080p on shielded BC-DGKat623 cable. Up to 100m (330ft) at 1080i or up to 90m (295ft) at 1080p on shielded BC-DGKat723 cable |
→ Cable |
Requires shielded twisted pair (STP) cable. For optimum range and performance use, use Kramer's BC-DGKat524, BC-DGKat623 and BC-DGKat723 cables. Note that the transmission range depends on the signal resolution, graphics card and display used. The distance using non-Kramer CAT 5, CAT 6, and CAT 7 cables may not reach these ranges. Use only shielded cable where both ends of the shield are soldered to ground |
→ Power Connect System |
A single connection to the transmitter powers both units |
→ Compact DigiTOOLS® |
3 units can be rack mounted side-by-side in a 1U rack space with the optional RK-3T rack adapter |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.