Equipped with the same features as EM 2000 but designed as a twin receiver, the Sennheiser EM2050 makes it possible for the RF signal to be looped through with the help of an integrated active splitter. With this design in the EM-2050, you can set up systems with up to 16 channels without using external splitters. An integrated equalizer and guitar tuning device complete the package.
→ Current consumption max 0.25 A
→ Rugged 19" all-metal housing with integrated power supply unit
→ Up to 3000 frequencies in up to 75 MHz switching bandwidth
→ 20 fixed frequency banks with up to 64 compatible presets
→ 6 banks each with up to 64 tunable channels
→ True diversity technology for best reception quality
→ Integrated antenna splitter for cascading up to 8 devices without using additional splitters
→ Pilot tone squelch for interference-free operation
→ Scan feature within the channel band system
→ Continuous scanning together with Sennheiser’s Wireless Systems Manager
→ Frequency setting in 25 kHz steps
→ Squelch setting always visible on the display
→ Antenna cables for active antenna supply
→ Transformer-balanced audio outputs
→ HDX noise reduction system with signal-to-noise ratio less than 120 dB(A)
→ Ethernet for connecting to a PC
→ User-friendly menu interface with two-color backlit graphic display (red as a warning)
→ Transmitters can be configured from the receiver menu
→ Transmitters can be synchronized over the infrared interface
→ 4 selectable equalizer presets
→ Soundcheck mode for monitoring transmission conditions
→ Monitoring and control using Sennheiser WSM PC software
→ User-friendly menu interface with two-color backlit graphic display (red as a warning)
→ Adjustable headphone connections.
RF frequency range | 516 - 865 MHz
|
Carrier Frequency | max. 3,000
|
Presets | max. 64
|
Switching bandwidth | max. 75 MHz
|
Peak deviation | ±48 kHz
|
Squelch | off, 5 - 25 dBμV can be set in 2 dB steps
|
Intermodulation spacing | ≥ 75 dB
|
Antenna connector | 2 BNC (50Ω)
|
Cascadable | 2 BNC (50Ω)
|
Gain | 0 dB ±0.5 dB based on antenna inputs
|
Compander | HDX
|
Frequency response | 25 - 18,000 Hz
|
Signal-to-noise-ratio | > 120 dB(A)
|
Total harmonic distortion (THD) | < 0.9%
|
XLR connector | 2 x XLR-3 2 x 6.3 mm jack
|
Audio output level (balanced) | 18 dBu max Setting range: 49 dB in 1 dB steps 6 dB gain reserve
|
Booster | 12 V DC, 2 x 200 mA Short-circuit proof
|
Operating temperature | -10 °C - 55 °C
|
Power supply | 100 - 240 V AC, 50/60 Hz
|
Dimensions (receiver) | 217 x 483 x 43 mm
|
Weight (receiver) | 2,900 g
|
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.