Single Channel Passive Video Transceiver - RJ45
|
|
By: NVT
Video/Power transmission Solutions
|
The NVT Single Channel Video Passive Transceiver RJ45 NV-217J-M Video Transceiver is a passive (non-amplified) device that allows the transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) data wire. Baseband (composite) signals of any type are supported.
The passive NV-217J-M features a RJ45 connection and Male BNC allowing connection directly to the camera or DVR. It is capable of delivering a fully equalized signal to the DVR when used with any Active NVT Receiver, yet is compatible with all of NVT's passive products for applications under 750ft (225m). The NV-217J-M Video Transceiver also incorporates improved transient protection that eliminates the need for a ground screw.
The unparalleled interference rejection and low emissions of the NV-217J-M allow video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant.
NV-217J-M features include:
→ Full-motion CCTV video at distances up to 750ft (225m) when used with any Passive NVT Transceiver or hub
→ Up to 1,500 feet (460m) shall be supported by any NVT StubEQ Hub
→ Up to 3,000 feet (1,000m) with a DigitalEQ Hub or NVT Active Receiver
→ Frequency response DC to 10MHz
→ Male BNC allows connection directly to the camera or DVR
→ RJ45 UTP terminal connection
→ No power required
→ Exceptional interference rejection
→ Built-in transient protection
→ Supports up-the-coax type control signal up to 750ft (225m)
→ Limited lifetime warranty
Video Frequency response |
DC to 10 MHz |
Video Attenuation |
0.5 dB typ |
Video Common-mode / Differential-mode rejection |
15 KHz to 5 MHz 60 dB typ |
Video Impedance Coax, male BNC |
75 ohms |
Video Impedance UTP, RJ45 |
100 ohms |
Power |
No external power required |
Ambient ambient temperature |
-22 to 167 °F (-30 to 75 °C) |
Humidity (non-condensing) |
0 to 95% |
Transient Immunity |
per ANSI / IEEE 587 C62.41 |
Network Wiring One Unshielded Twisted Pair |
24-22 AWG (0,5-0,64mm) |
Wire Category Type |
2 or better |
Wire Impedance |
100 ± 20 ohms |
Wire DC Loop Resistance |
52 ohms per 1,000ft (18 ohms per 100m) |
Wire Differential Capacitance |
19 pF/ft max (62 pF/m max) |
Body Length |
1.6in (40.5mm) |
Body Height |
0.88in (22mm) |
Body Width |
0.8in (20.5mm) |
Product Weight |
0.09oz (41g) |
Packaged Weight |
0.12lb (54g) |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.