Call Now: 1-800-284-2288 |
Rugged Pan & Tilt Positioners |
|
When your application calls for high performance and versatile platforms, the QPT-90 Series is designed for a variety of positioning and sensor support applications and is built for payloads requiring 90 foot pounds of torque. Integrated control processor (IC) units feature dual sensor serial control, lens drive and power supply interfaces making sensor integrations quick and easy. Serial IP units communicate via networked communications or dedicated joystick controller (Unicom controller). Analog units are effective solutions where simple command and control are required without a PC. The Sentry line takes our products to the next level by integrating stepper motors into the design for higher precision movements and broader speed control. Universal configurations provide internal and external payload interfacing. Our RF units provide one to three pass-through channels for up to 18GHz bandwidth performance.
→ Payloads up to 90 lb ft (122 Nm)
→ Analog driven or Digital Serial Integrated Controller (IC) models
→ Mounting platforms include plain formed table top, table top with single tilt-axis connector and 4 connector Universal models
→ Internal wire table top for IC or pass-through sensor wiring
→ Fixed, Inverted or Mobile Installations
→ Mil-Spec Connectors
Load Capacity: 90 lb-ft (122 Nm) maximum
Operating Voltage Range: 24VDC (±4VDC)
Total Power: Pan & Tilt Axes: 7.5A pk, 2.0A continuous at 24VDC • Heater: 4.4A at 24VDC • Standby: <0.8A at 24VDC (no heater current)
Pan-Axis Range: 360° continuous rotation (slip ring) • 435° (±217.5°) (non-slip ring)
Pan-Axis Speed: 0.005° – 25°/sec
Tilt-Axis Range: 180° (±90°)
Tilt-Axis Speed: 0.005° – 8°/sec at 90 lb-ft
Internal Heater: Thermostatically controlled 0°C (32°F) ON • 1.7°C (35°F) OFF
Operating Temperature: Without Heater: -15°C to 55°C (5°F to 131°F) • With Heater: -30°C to 55°C (-22°F to 131°F)
Rotational Limits: Fixed tilt hard limit, adjustable soft limits on both axes
Feedback: Optical Encoders (0.01° readout)
Repeatability: 0.25° (0.05° on Sentry models)
Duty Cycle 20%
Motor Type / Drive: Stepper (Sentry) and DC Brush
Communication to Pan & Tilt: RS232 / 422 / 485, IP Ethernet: 10 / 100 Base-T
Communication to Sensors: RS232 / 422, Ethernet Pass-Through
Control Protocol: Moog QuickSet or Pelco D
Connector Specifications: Mil-Spec grade used on all configurations
Load Connector Interfaces: 1 Mil-Spec connector at tilt axis (certain models) • 4 Mil-Spec connectors on Universal tilt table top
Materials: Housing 6061-T6 Aluminum, stainless steel hardware, permanently sealed radial ball bearings
Finish / Color: White powder coat paint over alodined chromate for corrosion resistance standard. Other colors and CARC available upon request
Weight: 37 lbs (16.8 kg) to 75 lbs (34 kg) depending on model
Test Cable and Software: 6 ft test cable and software included with all IC and Sentry configurations
qpt-90_pan_tilt_specs.pdf | datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|