Call Now: 1-800-284-2288 |
Rugged Pan & Tilt Positioners |
|
The QPT-50 Series of Pan & Tilt positioners are designed for a wide variety of applications. They are rugged and durable enough for virtually any environment. The QPT-50 can handle payloads up to 50 lb-ft of torque making it suitable for a wide range of sensors. Multiple models are available to fit your needs. Integrated Control (IC) units communicate via networked PC or through a separate controller. IC units feature integrated dual sensor serial control, lens drive and power supply interface making sensor integration quick and easy. Analog units provide effective solutions where simple command and control are required without a PC. The Sentry line takes our products to the next level by utilizing Stepper Motor technology into the design for more precise accuracy and broader speed control.
→ Payloads up to 50 ft-lbs (67.8 Nm)
→ Analog driven or Digital Serial Integrated Controller (IC) models
→ Mounting platforms include plain formed table top, table top with single tilt-axis connector and 4 connector Universal models
→ Internal wire table top for pass-through or IC sensor wiring on certain models
→ Fixed, Inverted or Mobile Installations
→ Mil-Spec Connectors
Load Capacity: 50 lb-ft (67.8 Nm) maximum
Operating Voltage Range: 24VDC (±4VDC)
Total Power: Pan & Tilt Axes: 6.5A pk, 2.5A continuous at 24VDC • Heater: 2.7A at 24VDC • Standby: <0.7A at 24VDC (no heater current)
Pan-Axis Range: 360° continuous rotation (slip ring) • 435° (±217.5°) (non-slip ring)
Pan-Axis Speed: 0.005° – 50°/sec
Tilt-Axis Range: 180° (±90°)
Tilt-Axis Speed: 0.005° – 12°/sec at 50 lb-ft
Internal Heater: Thermostatically controlled 0°C (32°F) ON • 1.7°C (35°F) OFF
Operating Temperature: Without Heater: -15°C to 55°C (5°F to 131°F) • With Heater: -30°C to 55°C -22°F to 131°F
Rotational Limits: Fixed tilt hard limit, adjustable soft limits on both axes
Feedback: Optical Encoders (0.01° readout)
Repeatability: 0.25° (Pan - 0.05°, Tilt - 0.05° on Sentry models)
Duty Cycle: 20%
Motor Type / Drive: Stepper (Sentry) and DC Brush
Communication to Pan & Tilt: RS232 / 422 / 485, IP Ethernet: 10/100 Base-T
Communication to Sensors: RS232 / 422, Ethernet Pass-Through
Control Protocol: Moog QuickSet or Pelco D
Connector Specifications: Mil-Spec grade used on all configurations
Load Connector Interfaces: 1 Mil-Spec connector at tilt axis (certain models) • 4 Mil-Spec connectors on Universal tilt table top
Materials: Housing 6061-T6 Aluminum, stainless steel hardware, permanently sealed radial ball bearings
Finish / Color: White powder coat paint over alodined chromate for corrosion resistance standard. Other colors and CARC available upon request
Weight: 26 lbs (11.8 kg) to 36 lbs (16.3 kg) depending on model
Test Cable and Software: 6 ft test cable and software included with all IC and Sentry configurations
qpt-50_pan_tilt_positioner_sps.pdf | datasheet |
Call Now: 1-800-284-2288 |
|||||
Email Us: sales@avsupply |
|||||
|