32-Channel Power Supply StubEQ Active Receiver Hub
|
|
By: NVT
Video/Power transmission Solutions
|
The NVT 32-Channel Power Supply StubEQ Active Receiver Hub NV-32PS42-PVD is a key hybrid component that consolidates all CCTV system cabling using standard EIA/TIA 568B structured building wiring. Designed for installation in the IDF/Telecom Closet or MDF/Equipment Room, Power Supply StubEQ Active Receiver Hubs have individual floating 28VAC outputs that support at-distance camera loads up to 0.5 Amp per channel for cable runs up to 1,500ft (460m). The NV-32PS42-PVD built-in StubEQ video receiver hub ensures a zero loss video signal for connection into a DVR or IP encoder. Standard features include: automatic-reset fault protection, transient protection, ground loop free individually floating outputs and per-channel diagnostics. All NVT products are UL and cUL listed, are compliant with CE, RoHS, WEEE, and come with NVTs lifetime warranty.
NV-32PS42-PVD features include:
→ Provides Class 2 SELV 28 VAC with up to 0.5 Amp/channel while receiving video transmission and delivering P/T/Z telemetry, all over a single 4-pair Cat5cable for each camera
→ Features 32-Channels with one video output per channel
→ Full motion CCTV video at distances up to 1,500ft (460m) when used with any passive NVT transceiver
→ Adaptive StubEQ fully automatic 2-band equalization provides adjustment free equalization everytime, no manual adjustments required
→ Frequency Response DC to 10 MHz
→ Automatic-reset fault protection; transient protection
→ Individually floating power outputs and differential video inputs ensure total ground-loop immunity
→ Diagnostic LEDs show load/no load, miswires, overload conditions, and video status
→ Limited lifetime warranty
Video Frequency response |
DC to 10 MHz |
Video Attenuation |
0.5 dB typ |
Video Common-mode / Differential-mode rejection |
15 KHz to 5 MHz 60 dB typ |
Video Impedance Coax, female BNC |
75 ohms |
Video Impedance UTP, RJ45 |
100 ohms |
Network Wiring |
One four-pair Category cable |
Camera Power |
Each camera is powered by a fully isolated (floating) 28 VAC Class 2 SELV output at up to 0.5 Amps. Each output is individually thermistor protected for auto-reset |
Power inlet |
IEC with molded power cord (included) |
Voltage |
115 / 230V |
Current |
5.0 / 2.5 Amps |
Protection |
5x20mm type T fuse 5 Amp 250V |
Wattage |
500 Watts |
Heat |
(NV-32PS42-PVD only): 325 BTU / Hour (NV-32PS42-PVD with cameras); 2,000 BTU / Hour |
Ambient Temperature |
-4 to 122 °F (-20 to 50 °C) |
Minimum airflow |
4ft3/min (0,1m3/ min) |
Humidity (non-condensing) |
0 to 95% |
Transient Immunity |
per ANSI / 587 C62.41 |
Dimensions, including connectors |
19in wide, 1.73in high, 12in deep; 43cm wide, 4,5cm high, 30cm deep |
Product Weight |
24.1lb (10,93kg) |
Packaged Weight |
40lb (18,14kg) |
Mounting Included |
Rack mount L brackets for front, rear, or wall installations; rubber feet for desk applications |
Cables Included |
Thirty-two 2ft (60cm) coax jumpers. Molded IEC power inlet cord 7ft (200cm) |
Mounting Optional |
NV-RMBK2 Rear Mount Support Kit (designed for use with thinner metal equipment racks) NV-WMBK2 Wall Mount Bracket Kit (heavy duty) |
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.