2.01 Megapixel Raw Data Output Mini Camera Link Industrial Camera
|
|
By: Hitachi
Industrial Video System & Broadcast
|
The Hitachi KPFR200SCL is CameraLink output system progressive scan RAW data output color CCD camera with a 1/1.8-inch size CCD which adopted the RGB primary color filter and a full fame shutter. The image of 1628 (H) x 1236 (V) is output in RAW data at 15 frames per second. The square format picture elements provide suitability for image processing applications.
The Hitachi KP FR200SCL 1/1.8-inch 2,000,000 pixels square lattice progressive scan CCD and the RGB primary color
mosaic filter achieve a high resolution and high color fidelity of 1628 (H) x 1236 (V) (UXGA). The camera has small SDR connector for digital outputs. Therefore, the camera has the realization of small-sized shape of 29 (W) x 29 (H) x 29 (D) mm. Power supply of is input from DCIN connector.
Imaging device | 1/1.8-inch interline CCD
|
Total pixels | 1688 (H)x1248 (V)
|
Effective pixels | 1628 (H)x1236 (V)
|
Pixel size | 4.4 µm (H)x4.4 µm (V)(square lattice)
|
Color filter | RGB primary color mosaic filter
|
Sensing area | 7.16 mm (H)x5.44 mm (V)
|
Scanning system | Progressive
|
Aspect ratio | 4 : 3
|
Frame rate | 15 frames per second (full pixel readout)
|
Horizontal drive frequency | 36.0000 MHz
|
Scanning frequency | Horizontal: 18.75 kHz, Vertical: 14.97 Hz
|
Sync system | Internal
|
Lens mount | C mount (Flange focal distance =17.526 mm)
|
Video output | Digital output (CameraLink)
|
Base configuration | 36.0000 MHz (Note: maximum cable length is 10 m)
|
Output image size | 1628 (H)x1236 (V) (full pixel readout)
|
Resolution | Horizontal / Vertical: 1200 TV lines
|
Sensitivity | 2000 lx, F8, 3200 K
|
Minimum illumination | 5.0 lx (F1.4, MAX GAIN)
|
Signal noise to ratio | 50 dB
|
Electric shutter | OFF, 1/15, 1/60, 1/125, 1/250, 1/1000, 1/2000, 1/10000, 1/50000 second; OFF is normal exposure (frame rate) or changeable by variable shutter (minimum 1/100000 second)
|
Gamma | γ = 1
|
Frame on demand | Mode: (A) Fixed shutter mode (8 steps or variable); (B) ONE trigger mode; (C) VD reset mode
|
Trigger input | CameraLink (CC1) *When Reset control mode CC1 and CC2 are used
|
Partial scan | Selectable start position and height of picture grabbing in 1H step.
|
Power supply voltage | 12 ± 1 VDC
|
Current consumption | Approx. 170 mA (approx. 2.1 W)
|
Ambient temperature | Performance: 0 to 40 °C ( 32 to 104 °F), less than 90 % RH (without dew condensation)
|
Operation | 10 to 50 °C ( 14 to 122 °F), less than 90 % RH (without dew condensation)
|
Storage | -20 to 60 °C (-4 to 140 °F), less than 70 % RH (without dew condensation)
|
Vibration endurance | 98 m/s2 (Acceleration: constant) 10 to 200 Hz, sweep: 10 minutes, XYZ 30 minutes
|
Shock endurance | 686 m/s2 (Drop test, once each top, bottom, left and right)
|
External dimensions | 29 (W)x29 (W)x29 (D) mm (Not including protrusions)
|
Mass | Approx. 50 g
|
© 1996 - 2024 | All Rights Reserved
Audio Video Supply Inc.
4542 Ruffner St. Suite 220
San Diego, CA 92111
Prices and specifications subject to change without notice.